Enter data to unlock iPhone. How to unlock iPhone (iPhone) if you forgot your password

Forgot your iPhone password - no one happens to ... What to do in this situation, how to unlock your iPhone without a password, Touch ID and Siri. There are several ways to bypass the password on the phone, but only two are 100% working - using iTunes and using the Tenorshare ReiBoot program. We will tell you more about each of them below.

How to unlock iPhone without password using iTunes

Method 1. How to unlock iPhone without password using iTunes

So, if you can't remember your iPhone passcode and can't unlock it, you can try using iTunes. All you need is to have a computer (Mac or Windows) with the new version of iTunes installed. And then follow these steps:

1. Connect your iPhone to your computer using a USB cable. Launch iTunes and sync your data so you don't lose it if you fail.

2. Now you need to put your phone into DFU mode. To do this, press the power button and the HOME button at the same time (on iPhone 7, the volume down button). The apple logo will appear on the iPhone screen - release the power button, and still hold the second button. Then release her.

3. iTunes will notify you that the device is in recovery mode. The phone will sync with iTunes. When the process is complete, the iPhone will return to DFU mode, but the password will no longer be on it.

Disadvantages of this method: it can take a very long time; it is impossible to use this method if the Home and lock buttons do not work on the iPhone; if you interrupt the process, you can lose all data.

In some cases, users are faced with the inability to use iTunes to unlock an iPhone without a password and Touch ID, since the standard program either does not recognize the device, or freezes, or is buggy. Then Tenorshare ReiBoot will come to the rescue.

Method 2. How to unlock iPhone without Touch ID using Tenorshare ReiBoot

The program will help you unlock iPhone without Touch ID and password. This tool solves most problems on the iOS platform by entering and exiting recovery mode. At the same time, you do not have to worry about the safety of your data on the device.

1. Download the Tenorshare ReiBoot program from the official website and install it on your computer. Launch it and connect your iPhone with a USB cable.

2. Press the active "Fix Operating System" button and wait for the iTunes and USB cable logo to appear on the phone.

3. Click Recovery Deep. The program will automatically restart your device.

3. After selection, click "Download".

4. The download will take some time, then use "Fix it now". After reinstalling the gadget, click "Finish" and exit the application.

How to unlock iPhone if you forgot your password? How often you can see similar questions on various forums. The terrible message “iPhone is disabled” - few people are happy.

Many people are dismissive of passwords, they say, what should I protect. Other users install it on all devices, including smartphones, thus ensuring the security of their data. Despite the emergence of fingerprint scanners (Touch ID on the iPhone, starting from 5), the usual passwords are not going to go anywhere. We decided to help the poor fellows who, having forgotten their password, panic. We've compiled instructions on how to unlock your iPhone especially for you.

Remember password

We are all people, we all tend to forget, even seemingly simple combinations that should have already been ingrained in memory. Try to remember the passcode to unlock your iPhone. Perhaps you have it written down somewhere, take a look.

Please note that you have 10 attempts, after which the smartphone will be permanently locked. Therefore, do not try to enter the password over and over again in the hope that one of the combinations will be correct.

Connect to iTunes

If you can't remember the password in any way, then you need to move on to more radical measures. To begin with, let's turn for help to the standard tools that Apple itself offers - iTunes. In this case, the situation can develop according to two scenarios:

• IPhone unlocked, data saved
• The iPhone is unlocked, but the data could not be saved

In the second scenario, which is rare, but it happens, the iPhone cannot connect to the computer in normal mode, various errors are displayed on the screen that prevent successful synchronization. A more common reason is that the user has never connected a smartphone to a computer before and, accordingly, has not entered a password in iTunes. In this case, your data most likely cannot be saved. It's good if you are one of those users who constantly back up important files and settings.

How to unlock iPhone while keeping data?

So, to begin with, let's analyze a more pleasant situation in which the iPhone connected to the computer without any problems, and was also identified in iTunes. This instruction works if you have synchronized before. Otherwise, when pairing, iTunes will ask for a password that you unfortunately forgot.

• Launch iTunes, connect your iPhone.
• Wait for the end of synchronization (the program creates backups).
• Select the connected device from the list of devices.
• A list will appear on the left, which lists the possible actions from the iPhone. Select Browse to unlock your device.
• A new tab will appear, which contains information about the iPhone (serial number, model, software version). Below you will see the "Update" and "Recovery" buttons. To unlock, we need a second one.
• Click on the button and wait for the password reset to complete. During the operation, a window may appear in which you must click the "Restore from iTunes backup" button.

At the end of unlocking, you can enter a new password, all data will be saved.

How to restore access with data loss?

Now about a more unpleasant outcome, in which it will not be possible to save information on the iPhone. This is how events develop, as a rule, for the reason that the user has never synchronized the smartphone with the computer. Therefore, iTunes simply does not know what kind of device is connected, and even more so does not have its backups. Basically, we will be flashing the device.

To unlock your iPhone without a password in this way, follow the instructions:

• We connect the iPhone with a working cable to the computer on which iTunes is installed.
• Turn off the device. Make sure it is disabled.
• Now we will transfer the device to DFU (firmware update mode). This is done by simultaneously pressing the "Power" (power, on the top end) and "Home" ("Home", on the front) buttons
• After the 10 seconds countdown, release the Power key while continuing to hold Home. Keep holding until iTunes detects a new device (about 10-20 seconds).
• Your iPhone will appear in the list of iTunes devices, for which you forgot the password.
• As in the previous unlocking instructions, go to the "Overview", click "Restore".
• We are waiting for the completion of the process (the firmware is being downloaded from the Internet, which can take a long time).

As a result, the iPhone will be unlocked, but absolutely everything is deleted.

Installing a new firmware

Not every user is suitable for unlocking the iPhone, described a little above: during the recovery, iTunes starts downloading the firmware for the device from the company's servers, and this process, I must say, is not a fast one. Therefore, users found an alternative - download the firmware separately.

1. Of course, download the firmware. It has the extension .IPSW. The web is full of resources that provide different versions for all models. Don't forget to install iTunes if you haven't already.
2. Copy the firmware along the following path: C: \ Documents and Settings \ username \ Application Data \ Apple Computer \ iTunes \ iPhone Software Updates.
3. Pairing iPhone with computer.
4. Go to the "Devices" section, then "Overview", then click the "Restore iPhone" button.
5. A window will appear in which you need to specify the path to the firmware by selecting the file with the .IPSW extension.
6. We are waiting for the end.

Since iTunes no longer needs to download the firmware on its own, resetting the password (and everything else) is many times faster.

How to unlock iPhone via iCloud?

There is another way to restore access to the iPhone if you forgot your password. However, for its implementation, it is necessary to fulfill some requirements. First, the "Find iPhone" function must be active on the smartphone (activated in the device settings). Secondly, the iPhone must be connected to a mobile network or Wi-Fi.

Again, all of your data will be deleted as a result.

So, the instruction:

• To unlock your iPhone, go to www.icloud.com/#find. A window will open in which you need to enter your Apple ID account information.
• The map will be loaded, on which you will see the location of your device.
• At the top from the "Device List" select the name of your iPhone, from which you do not remember the password.
• A window will appear on the right, displaying information about the device and available actions.
• We select the item "Erase iPhone".
• To confirm the action, re-enter your Apple ID password.
• The process of resetting and deleting data will begin, which is accompanied by an image of a bitten apple and a loading bar on the iPhone, on the computer screen - "Erasing procedure started."

It will take some time, after which the password will be reset - the iPhone is unlocked. As noted, all data has been deleted. You can try to restore them using backups and Setup Assistant, but as you might have guessed, the operation is not guaranteed to be successful.

How to unlock an iPhone if it's jailbreakable?

Photo: SemiRestore

Not every owner of a "jailbroken" iPhone will go to password reset with the loss of all the options that the option gives. In addition, users who have jailbroken devices have one more way to unlock.

The procedure is doomed to failure if the iPhone does not have a special OpenSSH set, which is downloaded from Cydia (an alternative to the App Store).

So, let's move on to resetting the forgotten password:

• Download the SemiRestore program, which is available on Windows, Linux, and OS X (note, you need a 64-bit version of the operating system). Install it and run it.
• We connect the smartphone to the computer. Wait for the program to recognize it.
• It is necessary to press the "SemiRestore" button. Don't worry, you'll find it quickly - the program's interface is simple.
• We watch the strip that shows the progress of the execution.

IPhone may reboot several times while cleaning, don't worry, this is normal. As a result, you will get a "clean" system, but the jailbreak will not disappear anywhere. All that remains is to come up with a new password and restore the backups.

Unlocking at the service center

Despite the fact that the methods for resetting a password on an iPhone, discussed in the article, can be called simple, many users will prefer to entrust this task to professionals. The help of a specialist can really come in handy for those who have very important information on their smartphone, otherwise you can handle it yourself.

If you nevertheless decide to go to the service center, do not forget to take the branded box and the cashier's receipt with you. Oh yes, and, of course, money. The unlocking cost depends on the specific iPhone model, starting from 1000-1500 rubles for 4S.

The American company Apple is a reliable supplier of modern smartphones and tablet computers to the international arena of digital technology. The company's devices are based on their own platform, which implements an operating system called "Ayos". It should be noted that it was the correct, competent, skillful optimization of the software that allowed the engineers to build in the devices less powerful (in comparison with competitors) “hardware”, and at the same time the two corresponding smartphones will have almost equal performance. Unfortunately, even the Apple operating system has a lot of flaws. We will talk about one of them today. There is a problem with the inscription “iPhone is disabled. Connect to iTunes ”. How to unlock IOS 7 in this case? What should be done in general? Let's first talk about why such a problem can occur at all.

Causes

The occurrence of a similar problem is associated with the human factor. Especially forgetful users are most susceptible to the likelihood of encountering it. Probably, each of us at least once forgot the required password. It doesn't matter what it was from: email, smartphone, or even a personal computer. I would like to advise those who are afraid that they will forget the password, either write it down somewhere, or use alternative methods. Otherwise, you run the risk of facing a very unpleasant and exhausting procedure for its recovery. Many users on the forums ask questions like this: “The system says: How to unlock IOS 8?”. First, let's be clear that the sequence of actions on IOS 7 and IOS 8 will be the same. Almost identical, one might say. Recall that a similar problem can be identified when working not only with an iPhone, but also with other Apple devices.

“IPhone is disconnected, please connect to iTunes”. How to unlock without data loss?

We all know perfectly well that any smartphone does not block the device immediately, but makes it possible to guess the password if you entered the wrong combination of characters by mistake. This method can be used if the number of options is limited and you know for sure. Many do not know what to do when the message “iPhone is disconnected, connect to iTunes” appears on the screen, how to save the data at the same time. Don't rush to factory reset your device. Try to sit down and ponder, remember the last time you changed your password, and if you changed it at all. Perhaps somewhere you have a clue left at that moment. Otherwise, you will have to resort to hardware capabilities. By the way, you have six attempts to enter your password. If all of them are used to no avail, the device will be locked for one minute, and a corresponding inscription will appear on its screen.

Does the problem depend on the firmware?

If you have dealt with several versions of operating systems before and faced a similar problem, you might have noticed some differences in the essence of this unpleasant process. It is interesting that all firmwares can be conditionally divided into several groups (if you compare them exactly according to this criterion). For example, firmware from the first group with every third incorrect password entry increases the waiting time before unlocking the screen. The second group has a constant blocking time before the possibility of subsequent input. But the firmware from the third group (and the most unpleasant) give a limited number of attempts, after which the message “iPhone is disconnected, connect to iTunes” appears on the screen. What to do in this case?

Disadvantage: fatality

Developers recommend to all users (and not only of the "apple" platform) to create backup copies of data. This is true for “Ayos”, and for “Android”, and for “Windows Foundation”. The point is, we never know when a device might fail. And being left without the data that was on the device earlier is sometimes quite painful. It is not the best feeling to understand that all information from work or photos of the family will be irretrievably destroyed. And for what? For the sake of simply recovering your password. Agree that it would be much easier to just write it down somewhere or create a backup copy? It doesn't take much time. It's a shame if you didn't. In this case, the only way to recover the information on the device is to guess the password manually. But, as we found out earlier, not every firmware will provide such an opportunity. So it turns out that if the user does not fit into a certain number of attempts, then he loses all data.

If the data is not important

In the event that you see the inscription “iPhone is disabled, connect to iTunes” (IOS 7), and the data on board the device does not play a special role, then you can reset the password counter using the appropriate program. We are talking, of course, about "iTunes". Let's consider additionally the situation when you connect your device to another personal computer. Note that the situation is also true when connecting an iPad. So, having connected our device to a “foreign” computer, we will see an additional request that will notify us that the computer is trying to access the information stored on our device. Accordingly, you will be prompted to allow access. To continue the operation, click on the button labeled “continue”. Again, an inscription will appear that will notify us that in order to allow access, you need to perform simple actions on our device. But there are some nuances here. It may well be that your screen will be locked due to an incorrect password. In this case, it is not possible to confirm access using the device.

Solution

Some users at this stage tend to give up and step back, driving themselves into a frustrated state. In fact, this should not be done yet, all is not lost. Indeed, you can always connect your “apple” to your “native” computer, where you can carry out the operation to reset the counter without any additional permissions.

Getting started resetting

So, let's say that you nevertheless connected your device to a “familiar” computer or laptop. In this case, the iPad or iPhone will be recognized almost instantly. Therefore, there are no more obstacles in our path that could prevent the successful operation of resetting the password counter. To do this, you need to perform the following steps. First, launch iTunes. To make it more convenient to work in it, you can activate the sidebar. It can be seen on the left side. Next, we connect our device to a personal computer using a USB cable. By the way, in parallel, you can notice the corresponding inscription, which can tell how long it will take to enter the password again (or maybe this situation will not arise). After connecting, check the screen. It is quite possible that the lock will be removed simply during synchronization, since some firmware have just such features. If nothing happened, but just everything remained the same, then we have no choice but to follow the further instructions.

“The Iphone is disabled. Connect to iTunes ”. How is 5?

So, what is actually required from the user next? Look for the left side of the Iphone user interface and click on it. Next, select the sync function and apply it. Next, synchronization will begin, but we do not allow it to complete. On the contrary, we interrupt with the help of a cross, which we press in a timely manner. The cross itself is located at the top of the software interface, not far from the inscription “step 1 of 4”. In some situations, an arrow may appear after clicking. By the way, you will also need to click on it. All this will allow us to stop the synchronization process that was started earlier.

Where it leads?

After performing such an operation, you can notice that the password entry counter will be reset or reset. In this case, we can try to enter the password again. Note that a similar operation can be applied to an Apple device an unlimited number of times. In this case, it does not matter at all whether an inscription appears that it is necessary to connect our device to "Aytyuns". Although, in fact, we did this at a certain step. The role is played by the fact that, in principle, the counter is reset not only during the imperfect synchronization procedure, although we have analyzed it as an example. Other operations can also reset the counter, freeing the user's hands so that the user can re-enter the password and try combinations.

Can't remember your password?

So, let's say that we have long and hard tried to remember the fateful combination of symbols to unlock our device. But this was never done. What actions can you take next? In fact, our choice is not that great. The only alternative to manual selection is a complete reset of the device. The so-called hard reset. The disadvantage of this method is that all user data previously stored on the machine will be permanently deleted.

In what cases can this method be applied?

Firstly, it is possible that situations may arise when the user has tried all possible combinations, but he hasn’t found the right one. And what to do then? Walk with a locked phone? Is there any benefit from him if he is in a similar state? The only way out that will lead to the return of full functionality is, in this case, just the same hard reset. Second, it may be easier to perform this operation if you have a backup copy of your data. As a reminder, the reset will be performed by putting the device into recovery mode.

The story of the unsuccessful attempts by the FBI to hack the iPhone of the "Texas shooter" has spread all over the world. On the one hand, this shows the reliability of iOS as an operating system, and on the other hand, it serves as a warning to inattentive users. In this article, we will tell you how to unlock iPhone 4S and other older models. We will not compete with the FBI in hacking practice. It is assumed that you perform all operations with your own smartphone.

Locking a phone can mean several actions. The simplest one, which the user encounters on a daily basis, implies protection from unauthorized access. The screen can only be unlocked by entering a numeric password. Without it, you can only make an emergency call to rescue services. The call is free and can be made even with a negative balance.

This is done in case something happens to the owner of the smartphone. The person who found it will be able to call for help even when the display lock is working. You do not need to know the password for this. Additionally, in order to help doctors, the user can enter the necessary data in advance into an electronic medical record.

In addition to the blood group, chronic diseases can be indicated, and intolerance to certain drugs can be noted. For emergency communication with relatives, the contact phone number is indicated.

Thus, using the capabilities of the shared lock screen, the iPhone owner can hedge against unforeseen circumstances. To exclude the possibility of random guessing the password, the function of erasing data after ten unsuccessful dialing attempts is provided. This option is activated by the user independently in the security settings.

If you manage to forget the specified combination of numbers, but remember your Apple ID account information, you can reset your smartphone in this way, and then restore it from an Icloud backup.

iTunes

Synchronizing iPhone with your computer is one of the purposes of iTunes. In macOS, it is built into the operating system, and Windows users can install it separately. Unlocking a normally working smartphone, to which the user has forgotten the password, is performed in one step. To do this, you need to connect to a PC using a USB cable. When the program recognizes the phone, select the "Browse" item in the navigation menu.

In the upper part of the main window, in the field of general information about the smartphone, the marked item will appear. By clicking the "Restore" button, we launch the download of the latest OC version - in this case, it's iOS 11.2. The time it takes to receive it from Apple servers depends on the speed of the connection used. No user intervention is required during the recovery phase, so you can leave iPhone connected to your PC and do other things. After the completion of the flashing, the data stored in the memory remain unchanged, only the access code is reset.

Recovery mode

If, for any reason, using the above method to restore the iPhone and remove the forgotten lock fails, you will have to donate its contents. If you set up regular synchronization with Icloud, the maximum that you will lose is the data of the last day. In this case, you need to connect your smartphone and then put it into recovery mode. This is done in the same way as a forced reboot.

For iPhone 4S (model A1387), press the Power off and Home buttons at the same time. The iTunes and cable logos will be displayed on the screen, indicating a successful connection. If, at the moment when the display turns off, release the power button and hold only "Home", the iPhone will start DFU mode. In both cases, iTunes will be able to find the device, download the required firmware and start installing it.

A lost device can be remotely locked using the Find iPhone function. It also allows you to erase data if necessary. This option can be accessed from any other Apple device or through a web browser. In the action menu, select the marked item and erase the data, bringing the smartphone to its original, factory state. After that, you can restore data using iTunes if the backup is stored on a computer, or via iCloud if it is in the cloud.

You can do this for devices that are linked to the same Apple ID or United Family Sharing.

Overseas cellular operators can sell iPhones with a contract. By purchasing such a device, you automatically become a subscriber for a period of one or two years. During this period, you pay the operator the cost of the device and services with a small discount. This is a kind of purchase in installments without a loan. The problem is that until the expiration of the contract with the operator, you cannot use another SIM card on it, since its activation ends with an error.

This is the most unpleasant type of blocking, which you cannot disable on your own. Usually they encounter it when purchasing "gray" devices from the hands. Help in solving this problem is provided by specialized offices that will need the IMEI of your smartphone from you. You can find it in the settings in the "Basic" group. In addition, in order to save time, it is advisable to know a foreign operator. The procedure for the so-called "unlocking" of a smartphone takes up to 20 days, and the cost varies from one to 10-12 thousand rubles.

Finally

The main condition for successful unlocking is knowledge of Apple ID data. When buying from hand, be sure to make sure that the smartphone is unlinked from the account of the previous owner and reset to factory settings.

Video instructions

You can watch how the described unlocking methods work in the video overview below.

Now the world is almost impossible to imagine without new technologies. Everything is striving for faster development and technologies are becoming more vulnerable. Now, almost everyone with a new phone, laptop or tablet prefers to protect their data with a well-thought-out password. This is especially often used by those who work with various bank transfers and personal data.

To protect their iPhone data, most users set passwords. But there are small gaps in memory, due to which it is not possible to unlock it. Also, the device can be blocked in other ways, for example, when the telephone was hacked. You will learn how to unlock a locked iPhone in certain situations in this article.

How to unlock an iPhone without a password?

If your iPhone is locked, then you don't have to worry too much, because there are proven ways to unlock it. The first step is to be able to connect to iTunes on a PC, laptop or netbook.

If the password was entered incorrectly a certain number of times, as a result of which the iPhone was blocked, then you can still sync with iTunes. Before changing the password for logging into the device, you need to connect your phone to USB using the standard cable supplied. It is imperative to synchronize all the information in order to be able to restore it.

Steps to restart iPhone

The iPhone is locked, but you urgently need to use it? To do this, you can apply a special DFU mode. Restart your iPhone with the following steps:

1. Press the lock key and the Home button at the same time, hold them for a few seconds.
2. When the logo appears on the iPhone, you need to release the lock button, but at the same time hold the "Home" button.
3. Next, you should wait for the notification about syncing with iTunes.
4. When the phone is found by the computer, the recovery mode will be visible.
5. Now you need to confirm this procedure.

Now the iPhone is locked (if the password is lost) only for a while until the end of the synchronization process. The phone will return to DFU mode, but without the password.

The procedure for unlocking a locked iPhone without a security code is simple but time-consuming. Often times, owners disconnect the phone from their PC beforehand. It is undesirable to do this, since if you resume incorrectly, all information can be completely erased. In addition, in future use, system failures may occur during the operation of the iPhone.

If you are faced with this problem, then the above method will definitely help you, but remember that unlocking an iPhone without iTunes support is unrealistic.

Other ways to unlock

Many users say that there are gaps in the performance of the iOS operating system that allow you to bypass the security code by making an emergency call. But Apple has fixed this error, so you won't be able to try to hack an iPhone without a security code.

There is also another method - when it is recommended to get rid of the iPhone password file via iExplorer, but this option is unlikely to help achieve this goal.

Some iPhone owners, that it is possible to change the password on the iPhone through the special Find my iPhone program. Unfortunately, this method is also invalid.

IPhone 5 S locked: what to do

How to unlock iPhone 5 S if it is locked? The device can be unlocked using a jailbreak. This method is very easy, you just need to download the SemiRestore program. The reset requires OpenSSH and can be obtained from the various sites available. Next, you need to connect the iPhone 5 S, launch the application and after the program is running, click on the SemiRestore button in the main application window.

How to unlock iPhone 5 if it's locked

This can be done using one more method. A locked iPhone 5 S can be unlocked using the iCloud service. To carry out the necessary actions, you need to make sure that the Internet is working on a PC. In addition, the Find my iPhone program should be running.

1. Go to the search program from iCloud.
2. Login to the site using ID and password.
3. Make sure that this service has found the iPhone online (a green circle should be highlighted).
4. Click on the phone and press the "Erase" button.

This technique will delete all data from the iPhone, so it is advisable to save it in advance.

Fight against scammers

If the iPhone is blocked by scammers, what to do? First, you need to discuss how to prevent attackers from gaining access to your Apple ID, which is precisely what makes it possible to remotely lock your phone.

1. Don't use email addresses for Apple IDs. These addresses are easily accessible to intruders.
2. Make your Apple ID password harder, less hackable. This method is recommended by Apple itself. Moreover, if the password turned out to be light, then the Apple ID, figuratively speaking, "forces" to change the password to a more complex one, this will happen when you enter the Apple ID management web page.

Now let's move on to the main answer to the question. What to do if the message "iPhone blocking" appears.

• Make sure that the iPhone is really locked, and you can't unlock it yourself. To do this, you need to go under your data to the Find iPhone program on the official website icloud.com. If you manage to enter this program, then immediately you need to remove the lock and quickly change the password to the Apple ID.
• Fraudsters often hack Apple ID very simply, that is, they know the password to the account in advance, but do not immediately change the password. Therefore, there is a great chance to solve this problem quickly and independently.
• If the "bad people" are serious about this case and have changed the password to their new one, they may demand money from you to unlock it. You should contact Apple technical support without any hesitation. This service will help to solve this problem even without presenting documents that the iPhone is personal property.
• There are all sorts of situations, and if, nevertheless, technical support did not help, then you will have to transfer money to scammers, because the phone can no longer be unlocked. Immediately after unlocking the gadget, you should change the password, create a new and very complex one.

You should not immediately panic and transfer a certain amount to the attackers, first you need to try all the solutions that were outlined above.

Unlocking iPhone 5 S with Forgotten Apple ID

People who forget their Apple ID or mailbox address are embarrassed and forced to prove that they own the iPhone. In this case, you need to perform some actions.

Before selling a phone, you should definitely disconnect the binding, as well as deactivate the Find an iPhone service.

Thanks to this, the future owner will be able to use all the functions without obstacles.

When buying an iPhone, you should always check this function, whether it is turned off or on.

To check, you need to enter the icloud.com website in the activationlock tab, you only need to fill in the IMEI of the device you are purchasing. This will help avoid problems with activating the iPhone if you lose contact with the previous user.

Unlocking iPhones is difficult and not easy for everyone. The most important moment in the unlocking process is the receipt that confirms the purchase of the device.

Why do you need a lock

One of the circumstances is the upgrade of the iPhone to the 7th version of iOS, in which the "Find an iPhone" function was created, designed to reduce the number of thefts of iPhones. But along with the scammers, users who purchased the device from previous owners also suffered.

So, if the owner of the iPhone during the sale does not disconnect it from his personal account, then the buyer has a great chance to purchase a locked phone. Now there are many specialists who offer services for unlocking iPhones, but, unfortunately, many of them turn out to be hackers.

Now you have some knowledge of what to do if your iPhone is locked. What to do - now you know!