Job responsibilities of an electrician for servicing electrical equipment. Job description of an electrician

In accordance with the main tasks assigned to the energy supply service, an electrician for the repair and maintenance of electrical equipment is obliged to:

1. Perform daily inspections of assigned equipment and record them in the operational log;

2. Take measures to eliminate the identified comments yourself, and if it is impossible, report this to the EMU engineer, shift engineer of the CS;

3. Perform operational switching in electrical installations up to and above 1000V;

4. Prepare workplaces and permit repair crews.

5. Perform maintenance and repair work on electrical equipment.

6. Have permission to perform hot work, work from an assembly tower, slinging work, gas hazardous work, work at height.

7. Rational use of material resources, consumption of fuel, energy, raw materials and supplies when performing work.

8. Observe the technological process of the work performed, the rules of technical operation and care of equipment, devices and tools.

9. Know the requirements for the quality of work performed.

10. Ensure rational organization of work at your workplace

11. In the absence of work provided for in the production instructions, the head of the EMU (EVS engineer) has the right to assign temporarily any other work that does not require special training and higher qualifications.

Responsibilities for labor protection and industrial safety.

Responsible for fulfilling the requirements of labor protection instructions by type of work and profession.

Participates in the first level of control over the state of labor protection, and before the start of a shift (working day) conducts an inspection of the workplace.

Monitors the serviceability of equipment, fixtures, tools and instruments.

Checks the presence and serviceability of fences, safety devices, blocking and signaling devices, personal and group protective equipment, the condition of passages, passages, platforms, staircases, railings, as well as the absence of clutter and clutter.

Reports to the foreman (foreman) any deficiencies discovered during the inspection and, on his instructions, participates in their elimination.

During the work process, the employee is obliged to:

use special clothing and other protective equipment, use safe labor practices, and comply with all labor protection requirements;

pay attention to the behavior of other workers, their implementation of personal safety measures, remind them of the need to use safe work practices, comply with safety requirements, industrial sanitation, fire and gas safety;

undergo training in safe methods and techniques for performing work, instructions on labor protection, on-the-job training and testing of knowledge of labor protection requirements;

undergo mandatory preliminary (upon employment) and periodic (during employment) medical examinations (examinations).

The employee is responsible for:

technically sound condition of equipment and mechanisms in terms of compliance of actual harmful emissions/discharges with the passport data of this mechanism;

timely presentation of equipment and mechanisms for instrumental measurement of the amount of harmful emissions/discharges;

timely and high-quality recording of operating hours of equipment that is a source of harmful emissions/discharges.

For violation of environmental protection, the employee bears disciplinary, administrative or criminal, as well as financial liability.

Characteristics of the work.

Performing simple work on departmental emails. stations, transformer power plants with their complete disconnection from the voltage of operational switching in electrical networks, inspection of transformers, switches, disconnectors and drives to them without disassembling structural elements.

Load regulation of electrical equipment installed in the serviced area.

Repair, charging and installation of explosion-proof fittings.

Cutting, splicing, insulating and soldering wires with voltages over 1000 V.

Participation in the repair, inspection and maintenance of electrical equipment, including disassembly, assembly, adjustment and maintenance of electrical devices, electromagnetic, magnetoelectric and electrodynamic systems.

Repair of transformers, switches, rheostats, control posts of magnetic starters, contactors and other simple equipment.

Carrying out individual complex repair work under the supervision of an electrician. more highly qualified fitters.

Performing rigging operations using cranes and other lifting machines

Participation in laying cable routes and wiring

Battery charge

Painting of external parts of instruments and equipment.

Reconstruction of electrical equipment

Processing of insulating materials according to the drawing: textolite, getinax, fiber, etc.

Checking the markings of simple wiring and circuit diagrams.

Identification and elimination of failures, malfunctions and damage to electrical equipment with simple switching circuits.

The employee must know:

Basics of electrical engineering.

Information about direct and alternating current in the scope of work performed.

The principle of operation and design of serviced electric motors, generators, switchgear equipment, electrical networks and electrical appliances, oil switches, fuses, contactors, batteries, controllers, mercury and silicon rectifiers and other electrical equipment and electrical appliances

Design and purpose of starting and control devices

Techniques and methods for replacing, splicing and soldering high voltage devices.

Safe work practices, sequence of disassembly, repair and installation of electrical equipment.

Designations of the winding terminals of electrical machines.

Solders and fluxes.

Conducting and electrical insulating materials and their main characteristics and qualifications

Design and purpose of simple and medium-complexity control and measuring instruments and devices.

Methods for measuring electrical quantities, techniques for finding and eliminating faults in electrical networks.

Rules for laying cables indoors, underground and on overhead cables.

Safety rules within the scope of the qualification group

The job description of an electrician for repair and maintenance regulates labor relations. It determines the procedure for subordinating an employee, appointing and dismissing him from his position. The document contains requirements for the employee’s education, knowledge, skills, a list of his rights, functional duties, and types of responsibilities.

Sample of a typical job description for an electrician for repair and maintenance

I. General provisions

1. A repair and maintenance electrician belongs to the category of workers.

2. The electrician for repairs and maintenance is directly subordinate to the chief power engineer.

3. A person who has a specialized secondary education in the field of activity and work experience in a similar position for at least one year is appointed to the position of electrician for repair and maintenance.

4. The appointment and dismissal of a repair and maintenance electrician is made by order of the director of the organization upon the recommendation of the HR department/immediate supervisor.

5. The electrician must know:

basics of electronics, electrical and radio engineering;
arrangement of electrical machines, units, measuring instruments;
technical characteristics, design, principle of operation of devices and equipment;
provisions of the organization’s governing documents that define the activities of the electrician;
rules for servicing electronic devices;
rules, methods for establishing the operability of electrical machines, mechanisms, electrical devices, instruments;
automatic control circuits, methods of their repair and maintenance;
rules for handling electrical materials;
methods of comprehensive testing of electrical installations, electrical devices, devices;
standards, methods of repair, installation of cable networks in explosion and fire hazardous conditions;
rules for drawing up electrical diagrams and other technical documentation for electrical equipment;
operating principle of automatic protection;
electrical circuits for switching distribution equipment;
signs of damage to electrical equipment and methods for eliminating them;
permissible loads on transformers, electric motors, electrically conductive lines of various sections;
standards for the use of spare parts and materials;
norms, rules of safety, labor protection, fire protection;
organization and technology of electrical installation work;
basics of labor law of the Russian Federation;
internal labor regulations.

6. During the absence of an electrician for repairs and maintenance, his rights, functional duties, and responsibilities are assigned to another official appointed in the prescribed manner.

7. The repair and maintenance electrician is guided in his activities by:

this job description;
orders, instructions from management;
governing and regulatory acts of the organization;
internal labor regulations;
orders of the immediate superior;
legislation of the Russian Federation;
Charter of the organization.

II. Job responsibilities of an electrician for repair and maintenance

A repair and maintenance electrician performs the following job responsibilities:

1. Monitors the proper, trouble-free operation and proper operation of the equipment being serviced.

2. Performs the following work in a timely manner:

adjustment, repair and regulation of critical, experimental electrical sections of technological equipment, communications of automatic lines;
disassembly, repair, assembly, installation of high-voltage electrical equipment of various types with voltage more than 15 kV;
maintenance, adjustment and regulation of electronic devices;
adjustment, maintenance of welding machines of various types of design, pulsed, ultrasonic, electronic installations, remote protection of automatic transfer switching systems, equipment using semiconductor element base;
repair, installation and dismantling of cable lines in special pipelines filled with oil and gas under pressure;
checking the accuracy classes of measuring equipment;
repair of epoxy terminations in high-voltage networks, installation of couplings between copper and aluminum conductors;
preparing electrical equipment for commissioning;
testing of electrical motors, devices, transformers after major repairs.

4. Instructs employees operating electrical equipment on how to prevent work-related injuries.

5. Study the operating modes of equipment, establish the causes of increased wear, take measures to prevent and eliminate them.

6. Studies and implements advanced methods of repair, maintenance, and installation of the assigned type of equipment.

7. Participates in equipment troubleshooting, installation, configuration, electrical testing.

8. Places and prepares requests for spare parts, materials, tools. Ensures their careful, rational use.

9. Repairs and regulates complex, critical, experimental electrical devices and devices.

10. Participates in the preparation of measures to improve the quality of work, the reliability of fixed technical devices, and the modernization of electrical equipment.

11. Carry out comprehensive tests of electrical equipment, motors and transformers after major repairs.

12. Prepares electrical equipment for commissioning.

III. Rights

A repair and maintenance electrician has the right to:

1. Act independently, within your competence.

2. Improve your qualifications and participate in training events.

3. Contact consultants on issues beyond the competence of an electrician for repair and maintenance.

5. Interact on official issues with departments of the organization.

6. Be informed about decisions related to your own work.

7. Require the management of the organization to create normal conditions for performing duties and ensuring safety.

8. Inform management about identified shortcomings in the organization’s activities and submit proposals for their elimination.

9. Do not begin to perform your duties if a danger to health or life appears.

IV. Responsibility

The repair and maintenance electrician is responsible for:

1. Quality of performance of job duties.

2. Violation of safety regulations.

4. Reliability of the information provided about the operation of the equipment.

5. Violation of the provisions of the organization’s governing documents.

6. Results of decisions made, independent actions.

7. Violation of labor discipline rules, internal labor regulations, fire protection standards.

8. Causing damage to the organization, its employees, or the state.

9. Improper performance of one’s official duties.

JOB DESCRIPTION

electrician

1. GENERAL PROVISIONS

1.1. This job description defines the functional duties, rights and responsibilities of the electrician "________________" (hereinafter referred to as the "Organization").

1.2. An electrician is appointed to a position and dismissed from a position in the manner established by current labor legislation by order of the head of the Organization.

1.3. The electrician reports directly to ____________________ Organization.

1.4. A person with ________________________ education is appointed to the position of electrician.

1.5. The electrician must know:

Technical characteristics and design features of instruments and equipment,

Design and principle of operation of devices and equipment;

Rules and procedures for testing devices and electrical measurements;

Typical types of damage and methods for their elimination;

Organization and technology of electrical installation work;

Fundamentals of electrical engineering, radio engineering, telemechanics;

Best practices in the operation, repair and maintenance of electrical devices and equipment;

Consumption standards for materials, spare parts and electricity;

Organization standards and methodological instructions for quality as they relate to its activities;

Labor protection, safety and fire protection rules and regulations;

Internal labor regulations in force in the Organization.

1.6. During the period of temporary absence of an electrician, his duties are assigned to ___________________________.

2. FUNCTIONAL RESPONSIBILITIES

An electrician carries out the following types of work:

2.1. Ensures maintenance of serviceable condition, trouble-free and reliable operation of serviced devices and electrical equipment.

2.2. Installs new electrical networks.

2.3. Conducts scheduled preventive maintenance (PPR) of electrical equipment according to the PPR schedule.

2.4. Identifies the causes of wear and takes measures to prevent and eliminate them.

2.5. Ensures proper operation, timely high-quality repairs in accordance with maintenance instructions, current technical conditions and standards, and maintenance of the Organization's electrical networks.

2.6. Eliminates malfunctions in the operation of devices, their repair, installation and adjustment.

2.7. Participates in the development of long-term and current plans for the electrification of production as a whole and its structural divisions.

2.8. Complies with the internal rules of the workshop and operating hours.

2.9. Complies with health, safety and fire safety regulations.

3. RIGHTS

The electrician has the right:

3.1. Submit proposals for improvement of work related to the responsibilities provided for in these instructions for consideration by management.

3.2. Receive official information necessary to perform your duties.

3.3. Require the administration to ensure labor protection, safety and fire safety rules.

3.4. Require the provision of protective clothing in accordance with current standards.

4. RESPONSIBILITY

The electrician is responsible for:

4.1. Incorrect operation of equipment in terms of electrical safety.

4.2. Untimely and poor-quality implementation of scheduled preventive maintenance, for equipment downtime that occurred through his fault.

4.3. Failure to comply with occupational health, safety and fire safety regulations.

4.4. Failure to fulfill one's functional duties.

4.5. Inaccurate information about the status of the work.

4.6. Failure to comply with orders, instructions and instructions from the head of the Organization.

4.7. Failure to ensure compliance with labor discipline.

5. WORKING CONDITIONS

5.1. The electrician’s work schedule is determined in accordance with the internal labor regulations established in the Organization.

I have read the instructions _______________/____________________ (signature) (full name)

"APPROVED"
CEO
OOO ____________
"___" _______________

JOB DESCRIPTION
Electrical personnel servicing electrical installations

The electrician on duty takes over his shift according to the approved schedule.
The duty electrician must:

When taking on duty, take an inventory of the keys to the premises of electrical installations, tools, read the entries in the operational log, comments, equipment operating modes, features of duty, and management orders.
Carry out repair, restoration and routine maintenance work on electrical equipment in accordance with the approved PPR schedule.
Follow:

Timely turning on and off of escalators
The condition of the elevators.
Lighting of the building, and is responsible for the timely switching on and off of internal and external lighting.
The operation of ventilation systems, in the event of a break in the belts, immediately take measures to replace them (together with the plumber on duty).
Switching installations to manual operating mode in the event of failure of the automation system (in accordance with the approved operating mode).

The electrician on duty must keep records in the operational log about operating modes, production switchings, equipment starts and stops, operational failures and actions to restore operating modes, indicating the date, time and measures taken.

Inspect the premises of electrical installations at least 3 times per shift, paying special attention to the temperature and reliability of fastening of cable entries, recording the results in the “Electrical Installation Inspection Log”, indicating the time of inspection.

In case of violation of the operating mode and failure of the equipment, the duty officer is obliged to independently take measures to restore the normal operation of the equipment and immediately notify management.

The electrician on duty is personally responsible for the correct actions when eliminating equipment failures, making decisions and restoring normal operation of the equipment.

The electrician on duty is guided in his activities by the “Rules for the technical operation of consumer electrical installations”, “Safety rules for the operation of electrical installations”, and instructions for the operation of engineering systems and equipment.

Chief Engineer ______________ / ______________

Appendix no. ___ to the employment contract

"APPROVED"
CEO
OOO ____________
"___" _______________

JOB DESCRIPTION
Electrician on duty

1. GENERAL PROVISIONS

1.1. An electromechanic is appointed to work and dismissed from it by order of the general director of the company on the recommendation of the head of the service (chief engineer).
1.2. The electromechanic quickly interacts and reports directly to the chief engineer and engineer.
1.3. Persons with at least secondary specialized education and with at least 1 year of experience as an electrician, at least 18 years of age and who have passed a medical examination are appointed to the position of electrician.
1.4. An electromechanic is an operational and repair technical personnel and, before starting work, must be familiar with the entire scope of work, the operating service and undergo training at the workplace with familiarization with labor safety instructions.
1.5. An electrician undergoes a medical examination within the time limits established by health authorities, safety regulations, electrical safety and fire safety.
1.6. The responsibility of an electromechanic includes performing scheduled preventive maintenance, as well as maintenance and repair of operating engineering power supply systems.

2.Functions.

2.1. The electrician ensures the operation, repair and normal uninterrupted operation of all electrical systems in the building specified in clause 1.6. this instruction.

3. The electromechanic is obliged:

3.1. Know: the basic principles of operation of electrical systems, their purpose and principles of operation; causes of malfunctions in the operation of systems, methods for eliminating them.
3.2. Know and follow safety rules when performing work that is the responsibility of an electrician.
3.3. The main task of an electromechanic is the operation of electrical systems, carrying out routine and major repairs.
3.4. All repair work and troubleshooting must be carried out with the permission of the chief engineer and engineer.
3.5. If malfunctions are detected in the operation of electrical systems and its equipment, the electrician is obliged to take all measures to restore normal operation of the system and immediately report the incident to management (see clause 3.4.).
3.6. Particular attention in our work is paid to the issue of prevention and prevention of emergency situations.
3.7. Know the rules and techniques for providing first aid in case of accidents, electric shock, burns and other cases.
3.8. The electromechanic is responsible for poor-quality repairs that result in disruption of the equipment of the serviced engineering systems.
3.9. Maintain order in the workplace, prevent unauthorized persons from being in the service premises, and comply with fire safety rules.
3.10. Follow the rules of corporate ethics, wear a uniform, be polite and self-possessed with tenants, work colleagues and visitors.
3.11. Ensure compliance with established requirements for handling restricted information.
3.12. During shift work (duty), the electrician is obliged to:

become familiar with the condition and operating mode of the equipment through personal inspection;
obtain information from the person handing over the shift about the technical condition of engineering systems and equipment;
check and accept operational documentation, instructions, keys to premises, communications equipment, tools;
familiarize yourself with all records and orders during the last duty;
formalize the acceptance of the shift by making an entry in the journal with your signature and the signature of the last person on duty;
report to management about acceptance and delivery of duty and all shortcomings during duty, any violations and comments;
acceptance and delivery of duty during an emergency prohibited;
Acceptance and handover of a shift (duty) in the event of faulty equipment or its abnormal operating mode is permitted with the permission of immediate superiors with a mandatory entry in the log about malfunctions.

3.13. While on duty, the electrician is obliged to:
- carry out walk-throughs and inspections of equipment, checking the condition and serviceability of all electrical systems;
- the results of walk-throughs and inspections are recorded in a journal;
- carry out preventive maintenance, maintenance and scheduled tasks for the shift;
- follow the production instructions;
- if disturbances in the operation of equipment or damage are detected, take immediate measures to restore normal operation in engineering systems;
- record in the operational journal the removal of the system for repair and its commissioning;
- in the event of an emergency, urgent repair work at the sites of other services, by order of the chief engineer and/or engineer, provide all possible practical assistance.

4.Rights.

An electrician has the right:

4.1. Require service managers to provide special clothing and living quarters in accordance with current standards, equipment of work areas, necessary tools, equipment and materials.
4.2. Require that employees of related professions of the Tramplin company correctly and carefully handle electrical equipment and electrical devices.
4.3. Turn off the equipment if problems are detected in their operation, threatening an accident or disruption of the equipment’s operating mode, while coordinating and notifying the relevant services and management.
4.4. Make proposals for organizing the work of the electrical service, improving the operation of equipment in use, saving electricity and other energy resources.

5. Responsibility.

The electrician is responsible for:

5.1. For unskilled actions during emergency response that resulted in damage to: tools, equipment, failure of engineering systems equipment.
5.2. For poor-quality performance of work according to requests, maintenance work, maintenance. 5.3. For violations of safety regulations, electrical safety and fire safety.
5.4. For damage or loss of assigned property.
5.5. For low performance and labor discipline.
5.6. For disseminating information constituting a company's trade secret.
5.7. For failure to follow these instructions.
5.8. For violating the rules of corporate ethics.

6. Relationships.

The electromechanic interacts:

6.1. With the on-duty plumber on issues of repair and maintenance of plumbing systems and other engineering equipment (see clause 3.3.).
6.2. With the administrative and technical staff of the company on operational, technical and organizational issues.

Chief Engineer _______________ / _____________

Many people know that there is a profession of an electrician. However, not everyone understands what its essence is. Meanwhile, the responsibilities of an electrician are quite extensive. This specialist primarily eliminates breakdowns and malfunctions in complex equipment. Let us consider further what exactly his work is.

Electrician: origin of the specialty

The name has Latin-French roots. If we translate the term literally, then an electrician is a corrector of the functioning of equipment. His task is to achieve maximum durability and efficiency of the equipment. The profession arose thanks to the invention of N. Tesla. It should be noted that over quite a long period of its existence, the specialty has hardly changed. Of course, with the development of technology, the responsibilities of an electrician have expanded significantly, and his knowledge has become more versatile. At the same time, the requirements for specialists have become more stringent. Currently, there are special regulations in force that establish the categories of electricians. Specialists undergo special training, education, and constantly improve their skills.

What is the job?

The electrician must:

Ensure uninterrupted operation of equipment. As part of this task, the specialist performs diagnostics of electrical and mechanical systems, eliminates detected faults, carries out preventive flushing of parts and cleaning of contacts.
Study the operating conditions of equipment to identify factors contributing to premature wear and take measures to eliminate them.
Conduct training for persons in direct contact with electrical devices. The specialist must explain the operating rules and safety precautions.
Participate in the installation of equipment.
Prepare requests for the purchase of spare parts and special tools.
Master and implement progressive methods of device maintenance.

Personal qualities

An electrician servicing electrical equipment operates in rather dangerous conditions. Every day a specialist is at risk of electric shock. Complicating the situation is the fact that electricians often work in very cramped and unfavorable conditions. Therefore, quite high demands are placed on such specialists. An electrician who repairs electrical devices must first of all be physically resilient. Among the personal qualities of a specialist are:

Stress resistance.
Responsibility.
Attentiveness.
Accuracy.
Creativity.
Sense of balance.
The ability to correctly and quickly navigate emergency situations.
Developed visual, effective and imaginative thinking.
Performance.
Discipline.

These are the most basic qualities that an electrician should have. The connections between these characteristics and the availability of the required amount of knowledge in various scientific fields provide an effective solution to the assigned problems.

Advantages of the specialty

The main advantage of the profession is its demand. High-level specialists are needed everywhere and always, both in the private sector and in the manufacturing sector. Young electricians get jobs quite easily. Another advantage of the specialty is decent earnings. Today, the average salary of an electrician in the country is in the range of 30-40 thousand rubles. A good specialist can additionally provide services to the public privately. Enterprising electricians even create their own companies to serve citizens and businesses. Another undoubted advantage of the specialty is the ease of obtaining it. Almost every city has an educational institution where you can learn to become an electrician.

Flaws

The main disadvantages of the profession include the constant presence of threats to health and life, and stressful situations. Careless movement can lead to the death of a specialist. Moreover, problems often have to be resolved quickly when every minute counts.

Another disadvantage is the work schedule. According to general rules, electricians work in shifts. However, in an emergency situation, accidents can occur even at night. Another important point concerns the volume of knowledge of the specialist. It should be understood that the complexity and responsibility of the activity requires certain skills and experience. Therefore, an education diploma alone is not enough here. Training must be taken very seriously.

Local regulatory documents

Like other similar documents developed for other specialties, the job description of an electrician includes general provisions, rights, and tasks of specialists. It also establishes the responsibility of employees for violating regulations.

The job description of an electrician is mandatory for compliance in all enterprises, regardless of the type of ownership. This document regulates the relationship between the specialist and the employer. The company also has occupational safety instructions for electricians. This act regulates issues related to safety.

Labor safety instructions for an electrician are drawn up taking into account the tasks performed by a specialist of one or another qualification. Each employee becomes familiar with the contents of the document before signing it.

Description of activity

An electrician belongs to the category of workers. He is directly subordinate to the chief power engineer. The position of electrician can be held by a citizen who has a secondary specialized education in the relevant profile. In addition, the person must have at least 1 year of experience in a similar specialty.

Enrollment and dismissal are carried out by order of the manager on the proposal of the immediate superior or personnel service.

Required knowledge

An electrician must know:

Fundamentals of radio, electrical engineering, electronics.
Construction of electrical units, machines, measuring instruments.
Technical characteristics, principle of operation, device design.
Provisions of local documents regulating the activities of a specialist.
Procedure for servicing devices.
Methods and rules for assessing the functional state of mechanisms, machines, devices, devices.
Automatic adjustment and control circuits, methods for troubleshooting them.
Procedure for handling electrical production materials.
The procedure for comprehensive testing of instruments, electrical apparatus, and installations.
Methods and standards for repairs and installation of networks in fire and explosion situations.
The procedure for drawing up electrical diagrams and other technical documentation.
The operating principle of automatic protection.
Electrical circuits for switching distribution devices.
Signs of equipment damage and how to eliminate them.
Permitted loads on electric motors, transformers, conducting lines of different sections.
Rules and regulations of safety, health, fire protection.
Fundamentals of the Labor Code of the Russian Federation.
Internal regulations of the enterprise.

Tasks

The responsibilities of an electrician include, first of all, ensuring proper and trouble-free operation and proper operation of electrical devices, units, and installations. Local regulations provide a list of activities that a specialist must perform. Electrician responsibilities include:

Adjustment, regulation, troubleshooting in critical, experimental areas of technological systems, communications of automatic lines.
Disassembly, assembly, troubleshooting, installation of various types of high-voltage installations with voltages greater than 15 kW.
Adjustment, maintenance, regulation of electronic devices, welding machines of various designs and types, pulsed, electronic, ultrasonic units, remote protection of automatic reserve start systems, units using an elemental semiconductor base.
Installation/dismantling, troubleshooting of cable lines of special pipelines filled with oil and gas under pressure.
Checking the accuracy classes of measuring instruments.
Elimination of breakdowns in epoxy terminations of high-voltage networks, installation of couplings between aluminum and copper conductors.

The specialist’s tasks include preparing units for commissioning, testing electrical devices, motors, transformers after troubleshooting them. The responsibilities of an electrician also include regulating complex equipment, ensuring the rational and careful use of spare parts, materials, and tools.

Rights

An electrician can:

Act independently within the limits of competence.
Improve your qualifications and attend training events.
Seek advice on issues beyond his competence from other specialists.
Submit proposals to the head of the organization aimed at improving operating conditions.
Interact with company departments on official issues.
Inform the manager about detected shortcomings in the organization’s work and submit proposals for eliminating them.
Do not start performing tasks if there is a threat to health/life.
Require the manager to create appropriate conditions for carrying out his activities and ensuring safety.

Responsibility

Sanctions may be applied to a specialist within the framework of current legislation if he fails to comply with the requirements of regulations. The electrician is responsible for: