How to open your own business in the production and sale of black soil. Production and sale of quality soil Equipment for the production of soil for plants

The basis of any landscape or gardening business is, of course, the soil, it is the head of everything here, as they say. And we are talking about fertile soil. The soil is a loose natural material. The soil by its nature is incredibly diverse, there is: dispersed soil, rocky, semi-rocky and many others. In landscaping or gardening, any soil can be used, and yet fertile soil is the most popular. That is why the production of soil of such a plan is an unusually profitable business.

So, fertile soil is a special type of soil, for the production of which, as a rule, peat, black soil, and all sorts of other useful additives and fertilizers are used. What makes such a produced soil good is its natural beneficial properties, it has all the microelements and nutrients necessary for the growth of crops. The fact is that such a fertile soil has a positive effect on the development of the root system of plants with its air-water properties.

Of course, everyone can and will be able to prepare the soil on their own, but it is much easier and more reliable to purchase natural soil that is ready for use. Soil production is an ageless business, it is a noble, and, moreover, profitable business.

The fact is that fertile soil is the best option for landscaping a particular area, for growing chic and ordinary gardens.

Also distinguish between vegetable soil, which is the top layer of soil, it is usually used as a fertilizer. The thing is that each individual plant variety requires its own soil, so you should not limit the production of soil to just one of its types.

Outwardly, the vegetable soil resembles black soil, it consists, for the most part, of peat, at least of sand. Thanks to this, the plant soil is unusually organic and can guarantee a high level of fertility. Peat in combination with a fertile soil layer contains a sufficient amount of natural humus and nutrients to activate plant processes in the soil.

The vegetable soil can be used for any kind of land improvement, it can also be used to enrich poor soils. It is important to know that the use of vegetable soil greatly improves the level of soil quality. In landscape design, such soil is also used to level lawns or to replace soil during repair work.

You can professionally produce vegetative and fertile soil for landscaping, planning, soil nutrition, lawn fertilization and much more.

The main thing in this business is excellent quality, otherwise the client will immediately see problems in work: after all, after 32-3 weeks, the soil shows what it is suitable for. Thanks to the production of soil, your customers will have flower beds filled with beautiful flowers, fertile gardens.

An important activity for a company engaged in the production of soil is the production of a universal soil for seedlings. It is necessary to ensure that the soil you produce, with minimal use of fertilizers, can independently grow flowers, vegetables and seedlings.

Specialists should be engaged in the manufacture of soil, plus special equipment is needed, better than a European manufacturer. Raw materials should be purchased exclusively from trusted suppliers, as the quality of the soil and satisfied customers are the main conditions for profit and success. During production, it is necessary to ensure that the soil in no case contains insect larvae or eggs, worms, pathogenic microbes, oil products and radionuclides.

The process itself looks like this - video:

The finished soil should be delivered to the customer in large environmentally friendly bags, and for business it is better to have several variations of packaging. For delivery, as a rule, it is enough just to call the company and order the necessary soil and its quantity.

A little later, when the initial stage of the business is successfully completed, it will be possible to expand the production of soil: to produce it for construction and road organizations.

In no case should chemicals be added to the soil, the soil sold must be a natural product made from the natural soil environment, ordinary sand and low-lying peat. In the manufacture of different types of soil, it is necessary to adhere to all sanitary and epidemiological standards, the place of production must be an environmentally friendly environment - the quality of the soil depends on this.

Modern equipment and appropriate technologies of life, milling are natural components of soil production, these processes are necessary for the proper preparation and storage of soil.

To order clean and high-quality soil, it is often enough just to call and order. It would be nice if your organization had an experienced consultant who could advise clients on this or that soil, could tell about the composition, application and properties in an accessible way.

It will be better for business if the supply of ready-made soil is carried out regardless of the time of day; over time, it will be necessary to develop a round-the-clock dispatching portal for customers.

Each person seeks to increase their income using various ways of earning. Unfortunately, hired human labor today is not valued highly enough to live without counting every penny. Therefore, many people try to start their own business, trying their hand at various business areas.

Sowing fields as a business.

You can work for yourself and get a rather big income not only in the city, but also in the countryside. If you have a certain area of land, then with proper technical processing and a full crop rotation, you can earn good money by realizing the harvest.

To start your land business, you need to set a goal to which you will strive. The main task of any business is to obtain maximum income at minimum cost. Therefore, you should try to use as many fixed assets and labor as necessary for a quality result. Remember that "the miser pays twice", and excessive spending may not justify itself.

When cultivating the land, it is necessary to take into account such factors that affect the final result:

1. Selecting the culture with which you will work.

2. Provision of machinery and machine and tractor equipment.

3. Hiring labor.

4. Soil fertility control.

5. Availability of a place to store the crop.

You should figure out what kind of culture you will sow your possessions. To make the right choice, analyze the climatic conditions of your region, soil properties. It should be borne in mind that each crop has its own favorable period for sowing and harvesting. Based on this, you will need to create the right crop rotation in order to get the maximum profit without depleting the land.

Take care of the equipment that will cultivate your land. Tractors and machine-tractor equipment, if it is not at your disposal, you can rent. You can also hire private owners of agricultural equipment, who for a fee will yell, cultivate and sow your fields. So, you will provide yourself not only with equipment, but also with labor.

If you yourself are unable to cultivate your land, you should hire workers who will be competent in this area. Try to hire qualified specialists who will act most productively.

If you seriously decide to take up this business, then you need to check the readiness of the soil to bear fruit. Statistics say that 50% of sown crops die due to the careless attitude of the farmer to the cultivation of his land. Therefore, in order to protect yourself from possible losses as much as possible, get rid of weeds and pests, and also take care of a full-fledged soil fertilizer.

After harvesting, the crop can be immediately sold. This is convenient, as it does not oblige you to search for a warehouse. If you can't find a buyer, or if you want to sell your crop later when it's at its peak price, then you need storage. The warehouse can be rented, which will be cheaper than building.

How much do you need to invest and how can you earn on the ground?

To start any business, you need to have initial capital. Own or credit funds must be invested in a business so that it makes a profit. Therefore, we will calculate how much money is needed so that the land business not only pays for itself, but also brings benefits.

If the land is in your possession, then you pay only a tax. If you rent fields, then you will pay a rent of approximately 3% of the value of the land. To date, land rent costs about 2190 rubles / ha.

Suppose you decide to sow your fields with sunflowers. This culture is relatively hardy to harsh climatic conditions. The calculation of grain for planting per hectare is about 5-10 kg, when the yield is 2.5 t/ha. Considering current prices, you will spend about 73-146 rubles per hectare on raw materials, and you will receive about 32120 rubles. from the sale of seeds per hectare.

If you have your own tractors and combines, you will only have to spend on maintenance and repair of agricultural machinery. The cost of hiring a tractor for cultivating, processing and sowing a field is approximately 3650 rubles / ha, as well as harvesting from one hectare.

If you do not want to sell the harvest directly from the field, you need to take care of building or renting a hangar for grain storage. Construction of one sq. m. warehouse costs more than 7300 rubles. Therefore, it is possible to calculate the possible harvest from cultivated land and build a hangar for the future.

So, you can see that you will need to invest about 7300 rubles in your land business. per hectare of land, as well as pay employees and allocate funds for the construction or rental of a hangar. If the land is not yours, then an approximate amount of 2190 rubles / ha is added to these costs.

By selling grain from one hectare, you can get about 32,850 rubles. Considering the costs, your revenue will be at least 21,900 rubles / ha. Multiplying this amount by the area of cultivated land, you will see how much income you will receive. From this money, you will have to pay the salaries of workers and income tax, as well as allocate funds for the next sowing of the fields.

After the sunflower, your land will be depleted and you will have to waste on fertilizers. It is not advisable to plant sunflower often, therefore, after harvesting seeds, it is advisable to plant winter crops or legumes.

The amounts calculated above are approximate reality. Prices for raw materials, agricultural machinery and labor are constantly fluctuating, so this information should be taken taking into account possible errors.

Thus, the cultivation of the land not only pays off, but also brings some profit. Every year your income and experience will grow. It should be borne in mind that the larger the area of \u200b\u200bland, the more profitable the business becomes.

Doing your job, you will see the result of your work. All income will be at your disposal and no one will be able to deceive you or underestimate your work.

It is known that small and medium business should become the basis of the Russian economy. Many would like to start their own small potting soil business. Many questions immediately arise. Legal questions can be answered in the media. The main question is where to start? Naturally, from the plan, but everything ultimately rests on money - the initial capital.

You can get a grant or a subsidy if the new production is based on new technologies. For many, this is a utopia. You can take a loan from a bank. There is a great risk of losing everything, including your own housing. Therefore, it is necessary to plan in such a way that the costs, including equipment, are not too burdensome.
To minimize risks, entrepreneurs expand their business in stages. At the first stage, manual packing of the soil is used. Capital investment is minimal. Further, factory equipment for the preparation and packaging of soil is purchased. Capital investments are, in some cases, significant.
Capital investments can be significantly reduced if you make the equipment yourself. And it's not as difficult as it sometimes seems. The most difficult thing is to be able to make auger screws. With the right tool, this is easy to do.
For the manufacture of equipment, only welding, a grinder, a drill are needed. Turning parts can be ordered on the "side". And, of course, we need drawings for simple, inexpensive, reliable equipment for preparing and packing soil. I assume this won't be a problem.
First you need to decide on the components of the soil and acquire the necessary documents. A scientific organization that has the appropriate license can help with this. Costs from 50 to 80 thousand rubles. There are ways to obtain documents in another way, less expensive, which I have no right to talk about.
Of the equipment, at first you will only need a packing unit with weight dosing, and an auger for mixing soil components and feeding them into the bunker of the packing unit. After that, you can make a vibrating screen and a crusher of soil components. Then you can make a mixer of soil components. A high quality mixture can be achieved using only a crusher and auger.
At the Institute of Organic Fertilizers, in my spare time from my main job, for about 10 years, I had to prepare, package and sell small wholesale soils based on peat and litter from a poultry farm. They tried to use semi-liquid cattle manure, but the soil turned out to be more sticky. They did it like this. They brought peat, made a "pillow" out of it. Litter and dolomite flour were placed on the "pillow" with a loader. Four parts of peat, one part of litter. Mixed beforehand with a bulldozer. Next, the mixture was loaded with a loader into the organic fertilizer spreader PRT - 7 or PRT - 10 and the mixture of soil components was unloaded into the room. In this case, normal mixing of the mixture occurred. After maturation, during which the manure bacteria made peat substances more accessible to plants, the soil was packed with a packing machine based on a ROU-6 organic fertilizer spreader.
In the chernozem regions, the soil is prepared on the basis of chernozem, rotted cattle manure, the mountains of which accumulated near livestock farms in the era of socialism. There was no point in introducing semi-liquid manure into the soil, with a huge amount of weed seeds. And if you add vermicompost to the soil, then you get soil of ideal quality.
There are also simpler recipes for soil preparation.
More details about the equipment for preparing and packing soil: packing unit, auger, vibrating screen, crusher, as well as the plant for pressing peat tablets, were described in previous posts of my blog.

Fertile soil is always in demand. Belarusians love to grow indoor plants and dig in the beds in the country. And therefore, there will always be hunters for high-quality useful land. Despite the seasonal surge in demand for finished products, the soil production business can be extremely lucrative. In this article, we provide answers to the most common questions. It will be useful for a potential investor to familiarize themselves with the material.

What is fertile soil and how to produce it?

In nature, there are many varieties of soil. Its production involves the creation of fertile soil, which is subsequently used in gardening, growing vegetables and landscape crop production. Useful properties of the earth are given in the process of its enrichment with chernozem, mineral additives. In addition, microelements and substances are added to the soil that promote plant growth and the proper formation of the root system and shoots. An important aspect is the creation of a special air-water regime, in which the plant feels as comfortable as possible. All these conditions directly affect the final fertility.

In addition to fertile soil, there are other types of loose natural material. For example, plant soil is also quite common. It is mainly used in the form of fertilizer: top dressing of tree roots, lawns and often in landscaping work.

How much money do you need to start a small business?

There are several main cost items that form the amount required to start a soil production business. First, you should register a business entity of a suitable form of ownership and obtain the appropriate permits. For the production of soil, you need to obtain a certificate and documentation for the production of soil of a certain composition. A specialized scientific organization that has a license can help with this.

The second main article is the preparation of the production line. A room is needed for storage, processing and packaging of soil. On an ongoing basis, it is required to purchase high-quality raw materials, which are the basis for future fertile soil. Packing costs quite a lot. At first, you can save a lot by using manual packaging. It will require the involvement of workers who will need to pay wages. However, for a novice businessman, this is a much more suitable option than purchasing expensive packaging equipment. It is desirable to proceed to this stage after a successful start. If the packaging unit can be purchased later, then at the initial stages you will have to buy or rent an auger, mixer, mixer, crusher.

The approximate calculation of the required amount is as follows. A simple production line consisting of a few basic units costs around $25,000-40,000. The cost of fertilizers and black soil depends on their type and volume. Buying in bulk is always cheaper. If the total amount includes funds for opening a business, attracting qualified employees, renting premises, then the approximate initial capital is estimated at $100,000.

Is the business of fertile soil production profitable in Belarus?

In our country, fertile soil is actively used by summer residents, small and large farms. The production of high-quality enriched land can bring a good income. If we talk about specific numbers, then the profitability rate can reach 300%. So, it will be possible to return the invested funds in 2-3 years. For maximum efficiency, it is necessary to carefully consider the marketing of finished products. This is a lot of work that needs to be done much earlier than the creation and packaging of fertile soil.

We work for you

The Raduga-LKM company manufactures and supplies unique, mobile equipment (mini-factory) for the rapid organization of the production of water-dispersion paints and varnishes of various viscosities (paints, putties, primers, enamels, varnishes, fire-retardant paints) with the possibility of packaging in containers from 1 or more liters (regardless of product viscosity).

Equipment performance:

Medium viscosity (paints, enamels) - 250 kg / hour, taking into account pumping (packing) of finished products.
Liquid (primers, varnishes) - 400 kg./hour
High-viscosity (putty, plaster, fire-retardant paint) - 150-200 kg./hour

Specifications:

The power consumption of the dissolver is 3 kW.
Dissolver volume - 215 liters,
Power consumption of the pump - 1.5 kW.
Filtration system - installed on request.
Electronic cutter speed controller from 0 to 1500 rpm.

When buying this equipment from us, we constantly provide technological support, help you choose one or another raw material, and consult over the phone. Products (water-dispersion paints and varnishes) are not subject to mandatory certification; at your discretion, you can purchase voluntary compliance.

How to start your own paint and varnish business

The production of paints and varnishes has been and remains one of the promising and profitable investments. Varnishes and paints are the most common and one of the most affordable finishing materials. Despite the fact that the domestic industry is developing quite actively in this segment, nevertheless, the competition is still not so high, and the new business has every chance of success.

Over the past 6-7 years, the volumes of the paint and varnish market have been constantly increasing. However, this growth was mainly due to imports, whose share before the crisis was more than 20%. Over the past two years, this market has declined by 2.4%.

Russian manufacturers mainly produce solvent-based materials (paints, varnishes, primers, putties), water-dispersion paints and varnishes, intermediates (lining oils, solvents) and oil paints. Moreover, in the segment of the chemical and petrochemical industry, the production of varnishes and paints occupies only 2.5% of the total output.

Analysts note that there is a shortage of domestic products on the paint and varnish market, although the production capacities for the production of these finishing materials are less than half loaded. Only ten Russian plants produce about 70% of the total production of varnishes and paints. However, small enterprises still retain a significant share of local markets of local and regional scale.

According to experts, by 2015 the market volume will reach 1511 thousand tons, which is 31% more than in the crisis year of 2009.

Classification of paints and varnishes

To begin with, we will understand the definition and classification of varnishes and paints produced.

Paints and varnishes, according to 28246-2006, are a liquid, pasty or powder material that, when applied to a painted surface, forms a coating that has protective, decorative or special technical properties. All paints and varnishes are usually divided into three groups: basic, intermediate and others. The main materials include:

varnish - a paintwork material that forms a transparent coating when applied;
paint - a liquid or paste-like pigmented material that contains drying oil of various grades or an aqueous dispersion of synthetic polymers as a film-forming substance and which forms an opaque coating when applied;
enamel - a liquid or pasty pigmented paintwork material that has a paintwork medium in the form of a solution of a film-forming substance and forms an opaque coating when applied;
a primer that, when applied to the surface to be painted, forms an opaque or transparent homogeneous with good adhesion to the surface to be painted and to the top layers;
putty - a paste or liquid paint and varnish material that is applied to the surface before painting to even out irregularities and obtain a smooth surface.

Intermediate paints and varnishes are used mainly as semi-finished products. These include:

drying oil - a product of processing vegetable oils with the addition of desiccants (substances that accelerate the film formation of paints and varnishes) to speed up drying;
resin - a solid or semi-solid organic material that softens or melts under the influence of a certain temperature;
solvent - a single or multi-component volatile liquid that evaporates when dried and completely dissolves varnish or paint;
thinner - a single or multi-component volatile liquid that does not adversely affect the properties of varnish or paint;
desiccant - an organometallic compound that is usually added to certain paints and varnishes to speed up the drying process.

There is another type of paints and varnishes - the so-called auxiliary and auxiliary materials. This group of materials includes:

a wash designed to remove old paint and varnish coatings;
mastic - adhesive, finishing or sealing compositions based on organic binders and other substances, forming a plastic mass, which under certain conditions can turn into a solid state;
hardener - a substance introduced into a varnish or paint for "crosslinking" the macromolecules of the film-forming substance;
accelerator - a substance that accelerates the formation of cross-links between molecules and contributes to the rapid drying of the paint layer.

In addition, several types of paints and varnishes are distinguished according to the type of the main binder. According to this classification, paints and varnishes can be distinguished:

based on polycondensation resins;
based on natural resins;
based on polymerization resins;
based on cellulose ethers.

Production of paints and varnishes

For the production of paints and varnishes, it is necessary to select a heated room with an area of 3 sq. m with a water supply and water storage, as well as a voltage of 220 V. As can be seen from the requirements, at the first stage of your work, a garage of sufficient area will be enough. To begin with, it is best to choose a specific type of product that you will produce. In the future, when your income allows, you can think about expanding the range.

Many entrepreneurs who consider the segment of paint and varnish products in terms of attractiveness for investment note that the market for water-dispersion paint and varnish materials has the greatest development potential. Domestic manufacturers are mainly focused on the production of oil and alkyd paints and enamels. As a result, almost a third of the volume of water-dispersion materials consumed is imported products.

Indeed, in the Russian market, the share of this type of product is significantly inferior to world indicators, despite the fact that these materials are easy to use, environmentally friendly and relatively durable. In addition, the production of water-dispersion paints requires a smaller budget than the production of other paints and varnishes.

There is only one significant drawback in the production of water-dispersion materials. Due to the fact that for a long time these products, manufactured by domestic manufacturers, were distinguished by a low price and even lower quality, the promotion of Russian paints and varnishes (even if their high and competitive prices) in our market is associated with high costs and difficulties. Therefore, at the very first stage of organizing and setting up your own production, consider possible channels for distributing your products.

The production of paints and varnishes consists of two stages: the production of semi-finished products (varnishes, pigments, etc.) and their mixing. As a rule, small enterprises purchase the bulk of the materials, while large enterprises produce on their own.

The choice of technological lines for the production of paints and varnishes depends on what materials and in what volume you are going to produce. The approximate cost of such equipment is from 100 to 200 thousand rubles.

For example, a line for the production of primers, impregnations and other low-viscosity materials with a mixer capacity of 1000 kg / h will cost about 160 thousand rubles. A technological line for the production of paints, varnishes and other low- and medium-viscosity materials costs approximately 180 thousand rubles. Equipment for the manufacture of building putties will cost a more modest amount - up to 140 thousand rubles.

From raw materials, you will need various fillers, pigments, binders, thickeners. The purchase of the first batch will take about 150 thousand rubles. Additional costs (approximately 50 thousand rubles) will go to the packaging of finished paints and varnishes.

The technology for the production of varnishes and paints is quite simple. For example, for the production of water-dispersion materials, a dissolver-mixer is used, which mixes all the components and simultaneously disperses loose paint elements with a milling mixer. For pumping the finished paint and dispersion through pipelines, special screw pumps are used, which do not destroy the dispersion and retain all consumer properties of the paint. The finished paint, if necessary, is filtered and packaged in a polymer container. Please note that water-dispersion paints are an aggressive medium with a pH value of 8 or higher. Therefore, it is highly desirable to use stainless steel equipment and communications in production.

If you plan to work on your own for the first time, you will need the help of another worker. In the future, with the growth of production volumes, you will have to organize round-the-clock duty and, accordingly, increase the staff of your employees. In addition to the working staff, you can hardly do without the help of an accountant (he may be visiting), as well as a sales manager for finished products if you do not have experience in this.

So, to organize your own small production of paints and varnishes, you will need at least 350-400 thousand rubles. Add to this the monthly expenses for rent, communications and wages (if you have employees).

The cost of finished products, your profit and the profitability of your business are directly dependent on what materials and in what volume you produce, as well as on whether you can create sufficient demand for them. With proper business management, the payback for such production is very high and can range from 2-3 months.

Profitability of production of paints and varnishes

The profitability (the ratio of net income to gross revenue) of the production of paints and varnishes depends on the specific product and averages 15% in the industry, while the profitability of retail sales of such products is 3-4 times higher. According to the most optimistic calculations, profit from one ton of paints and varnishes can reach 30-35 thousand rubles, and monthly income with average production volumes - 300 thousand rubles.

Pavel Biryukov

(c) www.openbusiness.ru - a portal of business plans and guides for starting a small business

Video about the production of paints and varnishes

The modern range of cement mortars is very wide, however, in traditional construction, when laying ... viewIt is best to talk about equipment for the production of bricks sequentially considering all stages ... view Fatty, very plastic clays acquire normal density when 30-40% of water is added, clay media ...viewKondratenko V. Peshkov V.Slednev D. Modern technology and equipment for the production of ceramic tiles.

Equipment for the production of primers

The package includes technological and regulatory documentation for the organization production of acrylic and latex primers:

Draft specifications TU 2316-002-00080679-2006 "Water-dispersion primer".

Technological regulations for the production of acrylic and latex primers.

Recipe and technological maps of production:

Primer for polystyrene boards VD-AK 055
Primer strengthening facade styrene-acrylate VD-AK 010
Primer strengthening for external and latex VD-KCH 012
Primer strengthening universal for external and internal works styrene-acrylate VD-AK 012
Strengthening primer for interior work VD-AK 020
Primer (concentrate) VD-AK 010
Primer acrylic deep penetration universal for external and internal works VD-AK 011
Acrylic deep penetration primer for interior work VD-AK 021

The price of the installation for the production of primers "VD-100": RUB 130,000 VAT not included

Reference Information:

Primers - compositions applied by the first layer on the surface prepared for finishing to reduce its porosity and ensure the required adhesion of the subsequent coating.

They differ from coloring compositions (paints) by a lower concentration or complete absence of dry fillers, and also by the fact that the primer cannot serve as the final coating, incl. with decorative features.

An additional property of primers is the protection of various primers from moisture, corrosion and decay.

Water-dispersion primers are divided into (depending on the type of dispersion), and subspecies (depending on the purpose). Let's take a closer look at the classification of primers .

1. Acrylic primer

Type of binder - acrylic or styrene-acrylate dispersion. Primers based on acrylic dispersions are applicable to almost all building surfaces (concrete, foam concrete, asbestos cement, fresh and old plaster, wood, fiberboard and chipboard, brick).

For priming surfaces, special types of primers are used - with corrosion inhibitors (as a rule, phosphating primers).

Acrylic and styrene-acrylate primers differ from latex (styrene-butadiene) primers in increased UV resistance.

Subspecies of acrylic primers:

Facade primer;

Deep penetration primer (including concentrated);

Strengthening primer for interior work;

Deep penetration primer for polystyrene boards;

Primer (concrete contact).

The deep penetration primer differs from the strengthening primer in the first place, in transparency. The deep penetration primer is translucent due to the particle size of the dispersion (less than 0.05 microns).

Firming primer milky color. Pay attention when buying.

2. Latex (butadiene-styrene) primer

Type of binder - butadiene-styrene latex dispersion. Applicable for almost all building surfaces (concrete, foam concrete, asbestos cement, fresh and old plaster, wood, fiberboard and chipboard, brick). Not suitable for priming metal surfaces. Less resistance to ultraviolet compared to acrylic (butadiene-styrene latex is destroyed within 5-6 years).

Subspecies of latex primers:

Facade primer (for local repairs);

Universal strengthening primer for facade and interior work;

Strengthening primer for interior work.

Latex deep penetration primers, unlike acrylate - does not exist, due to the difference in particle size of the dispersion.

Additional Information:

Paints and varnishes. General characteristics
Equipment for pouring coatings
Protection of metal surfaces from corrosion with paints and varnishes

watercolor

We develop and manufacture equipment for the production of expanded clay concrete building blocks ( cinder blocks) according to GOST 6133-84. Three models are serially produced block production equipment- from vibrating machine 1IKS with a mold for 1 block, to a mobile vibrating machine "Comanche" with a mold for 4 simultaneously pressed wall blocks (cinder block).

All machines for the production of cinder blocks- palletless type of molding, the so-called "laying hens".

Vibrating tables for the production of paving BC-700 and BC-1200 series

molding vibrating tables are intended for the production of vibrocasting paving slabs, elements of architectural decor, fences and similar concrete products using the vibrocasting method.

Paint production equipment

Equipment for the production of coatings(acrylic, latex, polyvinyl acetate) - colors, enamels, primers, "concrete contact", fillers, decorative plasters and coatings - installations of various degrees of automation and productivity, from simple dissolvers / dissolvers (dispersants) to semi-automatic mini-factories for the production of paints and varnishes (LKM).

Paint production equipment in all complete sets it is supplied with a set of regulatory, technical and technological documentation.

Gravity concrete mixers (concrete mixers)

Gravitational concrete mixers used for the preparation of concrete and mortar mixtures of varying degrees of hardness. The volume of the bowl of concrete mixers is from 130 to 180 liters. concrete mixers equipped with electric motors powered by a 220V household network.

Modular mini-plants for the production of polystyrene foam

Semi-automatic mini plants for industrial foam production(expanded polystyrene) with adjustable configuration.

The principle of mobile modules allows you to install foam production equipment practically in any production area.

Received sheet Styrofoam fully complies with the requirements of GOST 15588-86.

Vibropress V-50 for the production of expanded clay concrete blocks

Pallet vibropress V-50 for the production of cinder blocks, expanded clay concrete building blocks - the next step after the vibrating machines "laying hens". Performance vibropress B-50 is 50 blocks/hour, 2 block form, three types of building blocks produced in accordance with GOST 6133-84: SKTs-1, SKTs-2, SKTs-3.

Equipment for the production of fixed formwork

Line performance for fixed formwork production is up to 300 pcs. in shift. Wide degree of automation equipment for the production of fixed formwork. Block production fixed formwork- a necessary addition to the line for the production of polystyrene foam.

Equipment for the production of prefabricated monolithic floors

Equipment for the production of prefabricated monolithic floors. The overlap is formed by laying hollow blocks-liners on reinforced concrete beams, mounting additional reinforcement, steel mesh on top and subsequent pouring with heavy concrete.

Equipment for the production of construction putties

Equipment for the production of construction putties- latex, acrylic, oil-adhesive, based on PVA. Time-tested Soviet technologies, coupled with modern chemical components, give an impressive result.

In addition to the production of traditional putties, the capabilities of the equipment allow the production of decorative coatings, for example, the well-known Venetian plaster and perlite-based energy-saving coating.

Thermal insulation coating "Akvarella TM-150"

Ultra-thin heat-insulating coating "Aquarella TM-150" TU 5768-001-99799327-2010 for application to mineral and metal surfaces.

Equipment for the production of prefabricated chimneys

We develop and manufacture equipment for production prefabricated chimneys- enclosing structures made of expanded clay concrete blocks (with and without a ventilation duct) and covering slabs made of fiber-reinforced concrete.

Equipment for the production of primers

Equipment for the production of water-dispersion primers- acrylic and latex. Performance equipment for the production of primers- 500 l/h. The basic equipment for the production of primers includes an electronic dispenser of acrylic / latex dispersion, a pre-filter for water purification, dosing syringes of modifying components.

Equipment for pouring coatings

Equipment for bottling (packaging) technical liquids, dispersions and emulsions on water and organic basis - acrylic coatings, machine oil, antifreeze, adhesives, etc. materials.

Several degrees of automation - installations with visual control over the weight and semi-automatic devices with CNC. The liquid is pumped by a diaphragm pump of the Swedish manufacturer Tapflo with a Teflon membrane, the dosage of the material is an accurate electronic scale with a resolution of 10 g.

Industrial and domestic steam generators

Development and production steam generators- industrial and domestic steam generators(for saunas and baths). Steam generators are mass-produced, with a power of 2 kW with a working pressure of 0.7 atm - 2.5 kg / h, up to steam generators 160 kW with a pressure of 5.5 atm - 205 kg / h. Three-level protection system steam generators from overloads, built-in pre-treatment of water, phytocontainers.

Styrofoam shape cutting equipment

We produce polystyrene foam cutting machines- range from manual cutting to CNC machines. The use of a high-precision Hiwin profile, precision manufacturing of machine parts, and professional assembly provide a level of cut products unattainable until now.

Styrofoam Manual Cutting Tool

The RI-01 hand tool is designed for cutting polystyrene (styrofoam) blocks in a construction site. Model "RI-01" tool for manual cutting of foam easy to operate, provides uniform adjustable heating of the cutting wire from 0 to 100%, which guarantees high quality cuts of almost any density of expanded polystyrene.

Kraskoterka (burr mill) SO-116A

Mass production paint grinders(stone mills), modified versions of the classic model SO-116A. Paint graters millstones are designed for grinding and paste-like non-explosive compositions used for painting work outside and inside buildings (chalk pastes, putties, adhesive colors). The initial components (chalk, pigments, adhesives) are pre-soaked in water before grinding.