How to save hot water in an apartment. How to save water in an apartment with a meter

One day, each of us begins to wonder how to save water. After all, this is not only about reducing the payment of bills, but also about saving stocks on the planet. There are many tips and tricks for reducing water consumption, they are quite simple and trivial, and with their help you can save a lot without sacrificing yourself.

1. Do not leave the tap turned on while brushing teeth, shaving, washing hands, dishes and other activities.
2. Start typing cold water that flows out of the taps while you wait for it to warm up. In the future, it can be used to fill the tank or water the plants.
3. Carefully inspect and check for leaks in the plumbing system, in particular for toilet barrels and faucets. If problems were found, they must be eliminated.

Water saving taps

For small consumption, you can install water-saving taps, there are three types of them:
1. The mixer with aerator, when turned on, adds small bubbles to the water. In turn, this reduces the splashing of the droplets. The efficiency of pressure and washing is fully preserved, and the amount of resources used is reduced by 20%.
2. has a specialized blocker that will not allow water to flow out until the stream is heated to the required temperature. Thanks to this device, you can save several liters at a time.
3. The sensor mixer is quite expensive, but its efficiency is 50-70% higher than that of its predecessors. The principle of operation of this device is that when hands or dishes are brought under the tap, it starts to work.
For those who are thinking about how to save water in an apartment, the presence of a modern mixer is just a necessary solution.

Economical crane nozzle

Everyone knows that today you need to save water, for this, manufacturers have come up with a limiting nozzle. It is designed in such a way that the flow flows between the O-ring and the sprocket.

If there is no pressure, then the O-ring relaxes, and if the tap is opened, the pressure increases and it flattens, thereby closing the sprocket and reducing the space for the passage of water. After the pressure decreases, a place for flow begins to open.

The nozzle has a standard size and can be used with any type of mixer. It will not change the look of the crane, it is very easy to install. Such a device will help to reduce several times and will contribute to savings of 40-50%. It will also establish a constant head despite the fact that the pressure changes regularly.

Why do you need to install a water meter

Everyone wants to pay less for public Utilities, but not everyone knows how to save water over the meter and whether this is a justified saving. Thanks to the use of a water meter, it will be necessary to pay only for actual consumption, and not calculated norms by the state.

After the individual meter is installed, you do not have to worry about the fact that you need to pay for the loss of water in case of extraneous accidents, leaks from poorly working neighbors' taps or indoor pipes.

After installing the water meter, you can think about how to save water on the meter in order to pay less. As seen in practice, only 74% is useful water consumption, and the remaining 26% are losses. The most effective method the fight against them is the accounting, which is submitted by the consumer personally. As numerous studies show, after installing meters, a decrease in consumption can be observed.

How to save water using technical devices

I would like to ask the question of how you can save water in order to partially save the family budget. For this, there are technical devices that it is desirable to have on hand.
1. In the kitchen, install a sink that has two trays. Thanks to this, you can significantly reduce the water consumption by washing the dishes in one, and rinsing it in the second with soapy water.
2. Single-lever mixers are best. In these taps, the process of mixing hot and cold water takes place much faster.
3. For a shower, you need to purchase a small perforated watering can and hang it slightly lower than usual.
4. If there are plans to purchase a washing machine or dishwasher, then it is advisable to choose only products with a water consumption class AA.
Initially, it may seem that these methods will only increase costs, but they will actually help to save well.

How to save money in the bathroom

The bathroom is one of those areas where water is used the most, so it is important to know how to save water here.
- You do not need to keep the tap constantly open while washing your hands, shaving and brushing your teeth.
- Shower more often than bath.
- No need to save on household appliances... Older washing machines use a lot more water.
- Get a shower that has a low resource consumption.
- Pre-soak your clothes before washing, it will save you hassle after washing.
- Soak the dishes before washing, this will result in a much lower consumption.
- Use the water-saving mode on the dishwasher.

Using economical shower heads

If a 5-liter saucepan can be filled in 25 seconds, be sure to install a nozzle with minimal holes, which retains up to 50% of the water. Another option, how to save money as well as cold, is a shower head, in which an aerator is built in, it fills the stream with air bubbles. Thanks to this device, you can reduce water consumption by about three times without losing the quality of the jet. So the cost of a 5-minute shower will not be 100 liters, but only 30. Use such gadgets in your apartment - and questions about how to save water will disappear.

What to do to pay less for water

There is an opinion that those who know how to save water on the meter will pay less. Many residents of houses and apartments are convinced that the meter, of course, helps, but cannot solve all problems. Water costs are primarily dependent on the human culture of consumption, as well as the availability of a careful and careful attitude to water among residents.

Many people turn on the faucet half or full just to wash their hands, although a small trickle is enough for this. Now look at your receipts - and there you can see that the water resource is one of the most expensive items of all expenses. How do you fix this?

In order to understand how you can save water, first observe your relatives. According to this principle, it is quite easy to choose your program for rational use, including financial resources.

Pay close attention to the correct operation of your plumbing - this is a major source of water loss. You can check this thanks to the indicators that are on the meter, if they move, then there is a leak somewhere. Modern taps, which have metal-ceramic parts inside instead of elastic gaskets, will forever forget about dripping from them.

You do not need to turn on the mixer 100%, very often a little ajar is enough. Close the taps firmly enough and be sure to teach this to your household.

Install straighteners, aeration nozzles and perlators at home. With their use, you can significantly reduce your water consumption. These rules make it easy to get a good savings. But changing personal habits is considered the main factor in answering the question of how to save water.

In everyday life, there are tips on how to save water in an apartment, which will significantly reduce costs.
1. Be sure to consult and find out if compensation is provided for the installed devices located in the apartment or house. In some regions, this is encouraged by the state. There are areas that rewarded buyers with discounts for buying dual-flush toilets, and suppliers sold cheaper or even donated aerators for faucets and shower heads that have little flow.
2. If the area in which you live is marked by a small amount of water, then be sure to check the rational consumption and restrictions.
3. Talk to your family members and try to get their support in saving.
4. The water that remains after washing can be used to wash the car, and the water that is obtained after washing fruits and vegetables can later be useful for gardening.
5. Be sure to properly dispose of hazardous materials such as cleaning agents, batteries, fertilizers, pesticides, and engine oils. All these benefits, of course, do not affect water conservation, but they are very important for the safety and purity of operating sources.
Take care of nature and prevent its destruction, save water. Pictures that are sometimes encountered can turn a person's consciousness. Be on the lookout for the precious resources of our planet.

Those who do not have metering devices pay according to rates that take into account not only your needs and expenses for general household needs, but also cover the loss of water from the pipes that are always flowing in the basements. That is, only citizens who agree to pay according to this scheme will be at a loss - especially if hot water is also supplied to your house centrally.

Having put metering devices on the water, you will be pleasantly surprised how much the numbers in your payments have decreased, even though you will be charged ONE in a separate line - for water spent on general needs of the house (washing and repairing entrances, watering lawns, etc.). ). Otherwise, you will only pay for the actual expense.

So, for those who still pay at the rate, the number one tip is to install a meter. We do not recommend doing this on your own, since if mistakes are made in the installation, the device will not be sealed to you.

The easiest way is to contact the water utility with an application for installation and registration of the meter. The device can be bought not only from them (as a rule, they are more expensive there), but also in any specialized store - only it must be of the established sample. It will be installed for you, an acceptance certificate will be issued, the date of acceptance and initial indicators will be put down in the meter's technical passport, the date of the next verification, which should be carried out every 4 years, will be indicated.

After the device has been put into operation by the water supplying authority, it is possible to start paying only for the actually consumed volume.

Prices for water meters

Water meters

Simple and affordable ways to save

Even if you have set, you should not relax, because there are many more ways to help make your monthly water bill even less. The main thing is to monitor the condition of devices and pipes, and in case of leaks, to eliminate them in a timely manner. In the picture you can see how much water flows into the pipe in case of a particular malfunction - and this is your money.

Advice! The biggest problem in this regard is the toilet bowl, since it is not always possible to identify a leak in it visually. Experts recommend checking this way: pour any coloring matter (for example, potassium permanganate) into the tank, and if after a short period of time colored water collects in the bowl of the device, then it's time to invite a plumber - well, or make repairs yourself.

We repair the tank

Most of our citizens' apartments have compact toilets. Using such a device as an example, we will consider the principle of its repair.

Table 1. Tank repair

Steps, photoOperating procedure

The tank lid is screwed on through the release button, which must be unscrewed.

After removing the lid, we look to see if water is flowing through the overflow. If not, then the reason is not in the breakdown of the drain mechanism, but in the petal - the sealing rubber.

Turn off the water and discard the contents of the tank. Unscrew the drain fitting, which is a single unit, and take it out for inspection.

Turning over the block, you will see the same petal. Sometimes it is enough to simply clean it of sludge, and it will fit snugly against the hole.

Step 5 - cleaning the drain hole

Wipe with a rag both the rubber band and the perimeter of the drain hole.

Having removed the dirt, which may have been the cause of the tank leak, put the fittings back in place. This is very simple, as it is held in place by small round protrusions on the sides that snap into the corresponding grooves.

Having installed the mechanism, start up the water and check the operation of the tank. If it continues to flow, remove the unit again. Now try to remove the elastic and flip it from one side to the other (relief down, smooth side up). Sometimes it helps. If not, you just have to install a new seal.

Reinstall the fittings. After making sure that the water is no longer flowing, screw the lid back on and you can use the toilet.

As you can see, tank repair is very simple and cheap. True, if the case turns out to be a breakdown of the drain mechanism, it will need to be replaced completely. It costs about 1050-1250 rubles, but, believe me, it will save much more.

Video - Eliminate the leak in the toilet cistern

Economical toilet

Also, pay attention to the water consumption of the toilet model that you have installed. It can vary from a couple of liters to ten, which, you must agree, is very significant. But in any case, the tank fittings can be configured for economical drainage, especially since 4 liters are quite enough for this (this is the maximum).

On a note! One liter is enough to flush liquid waste, so many manufacturers offer models with two buttons, each of which is configured for a different flush volume. A large button will release twice as much water as a small one. These devices are the most economical today.

To save water, you can also install a toilet, the tank of which is combined with a washstand. In addition to the fact that you will use waste water for flushing, there will also be more space in your bathroom due to the sink.

Prices for toilets, urinals, bidets

Toilet bowls, urinals, bidets

What are the most economical mixers

If you are making major repairs in your apartment or are just moving to a new building, it's time to think about choosing plumbing fixtures that will help you save on water bills. Most of all it is spent by the usual two-valve tap with rubber gaskets, which wear out very quickly. A dripping tap can take up to 700 liters of water from you per month.

It is much more convenient to use a single-lever mixer. By moving the lever vertically, you meter out the water supply, and horizontally, you regulate its temperature. Such taps almost never flow, since inside they do not have a crane-axle box, but a cartridge. Another thing is that this element is more sensitive to water quality and wears out faster if scale and dirt gets into it. But in such operating conditions, any crane will feel uncomfortable.

Modern single-lever devices have long begun to supplant models with two valves. Nevertheless, any plumbing, even the most expensive, wears out over time. We will show you how to repair a faucet on a mixer with one handle.

In public places with a large flow of people, sensor faucets are installed almost everywhere. They are equipped with a thermostat that sets a comfortable temperature for users, and the water opens only when you bring your hands to the faucet spout. A battery-powered sensor installed on it detects movement and gives a command to start the water. As soon as you remove your hands, the jet is automatically shut off, which gives significant savings and will not allow you to ever forget about the switched on tap.

Note! Such mixers are quite expensive (about 8-10 thousand rubles), but given their longer service life and a significant reduction in water consumption, these costs pay off quite quickly.

Mixer prices

Mixers

Video - How to choose the right plumbing for your home

Installation of a water heater

For many, one of the reasons for overruns is the centrally supplied water, which does not have a comfortable temperature for bathing. At first, it generally goes cold, it has to be lowered for a long time, until finally it gets warmer. But even then its temperature is not prescribed by the norms of 50 degrees, but at best 40 - 45. A picture familiar to many - isn't it?

If you are tired of writing complaints and swearing about this, refuse such a service altogether - all the more so as the utility bills do a lot for heating the water. Install a boiler-type apartment in the apartment (in which there is always a supply warm water), and you will save on one more item in the receipt.

Such a device can reduce your hot water costs by up to 40%, even though it is powered by electricity. And a lot of space for its installation is not required - you can always choose a model that is suitable in volume and shape, which can be installed either under the countertop in the kitchen, or above the bathroom in the bathroom.

On a note! For those who suffer from annual summer blackouts of hot water - this option will be the best solution to the problem.

Prices for water heaters

Water heaters

Devices and equipment that help to account for water and reduce its losses are just a few ways to save, which are not the only ones. Much also depends on ourselves, or rather, on our habits.


In general, if you take a bath with a thin, barely noticeable trickle, the meter may not even notice such a flow. True, the water will cool down while it is gathering at such a rate, and you will no longer want to swim in it. But you can take a bath in this way at night, and use the water for all other needs, including a tap during the day just to draw a kettle.

How to save water in apartments with meters installed to measure the consumption of cold and hot water so as not to pay extra money, - the question is very topical today, but the answers to it are simple, and the ways to save water on the meter are quite effective. Most of them do not require material investments, but there are also very expensive ones, although they will pay off after a while.

Savings in everyday life are achieved in the following ways: thrift and the acquisition of appropriate technology.

Reduce costs without investing funds

How to save on water with meters is simple:

It would seem that such simple measures, but allow you to effectively solve the issue of how to save water on the meter. A decrease in the amounts in payments can reach 50% or more.

Buying economical equipment

How to save water in an apartment using modern technologies:


It should only be borne in mind that it is necessary to purchase both plumbing fixtures and a washing machine, dishwasher and vacuum cleaner from well-known manufacturers from trusted sellers. The energy efficiency class of the dishwasher must be AA, washing machine must correspond to energy class A and above (A +, A ++), have washing class A.

These measures will help to reduce costs, and to direct the saved budget to other needs. In addition, by saving water, you help solve environmental problems.

Just do not heed the advice of some "craftsmen" how you can save money by using various illegal methods: using magnets, stopping the counter impeller with a ball, etc. Remember: gambling with the state in this case is an extremely dangerous business that can lead to huge fines.

You may be interested in:

In my opinion, a water meter should be installed in every home. Only seeing the real consumption figures, many begin to think about careful use. water resources... Therefore, today we will talk about how to save water in an apartment where there is already a meter.

Drop by drop - and the ocean

Perhaps older readers remember this song from the cartoon from the times of perestroika. Many began to understand its relevance only now, when the increase in the cost of communal apartments is racing with a decrease in income.

Saving water should be started precisely with the search for such “drops” with which your family budget flows away. This could be a leaking faucet, a leaky pipe, or a broken toilet cistern mechanism.

More or less serious leaks can be detected with a simple method. Leaving home in the morning, write down the meter readings, and check in the evening. If they have changed, it means that you have a large loss of water in your apartment. If you stay in place - do not rush to rejoice, because the meter may simply not respond to small "digging".

The results of my small experiment showed the following. If one drop falls from the tap per second, then a little less than a liter of water is drawn in an hour. This is about 22 liters per day, 660 per month, almost 8,000 per year. Needless to say, if we are talking about a trickle, not a drop, then the numbers will be much higher. So much for the ocean. Therefore, eliminate even the smallest leaks in an apartment with a meter.

If your pressure is constantly jumping or it is too large, you can save a lot by putting it on the input to the apartment.

How to save water in the kitchen

The use of water in the kitchen is somehow related to food. It turns out that the less you cook and eat at home, the less expense. Sometimes lunch in a nearby cafeteria or fast food establishment will cost even less than one prepared with your own hands. Plus time savings. True, this option is more suitable for bachelors and childless couples, so let's still return to our kitchen and see how we can reduce water consumption.

1. When choosing a sink, give preference to one that has two pallets. It opens up significantly more possibilities for saving water. In one compartment, you can use the flowing jet, and the other can be closed with a stopper and used for washing vegetables or dishes.

2. Use special water-saving mixer attachments. They are able to reduce water consumption by one and a half times.

3. Train yourself to pour just as much water into a pot or kettle as is required for cooking or brewing tea. Pouring “with a margin”, you are wasting not only water, but also gas or light used for heating.

4. Everyone knows that microwave ovens have a defrost function. But for some reason, many in the old fashioned way put frozen meat in the sink, under running water. Like, why waste electricity? It is commendable, of course, but since when did water become free? Believe me, the microwave will do its job faster and more economically. And the most the best way- leave the meat in the refrigerator overnight.

5. Burnt or dried food residues should not be washed away by vigorous rubbing under a hot stream. It will be much more economical to fill the dishes with water and leave them in the sink for a while. It will become much easier to wash it in an hour.

6. It's amazing how many housewives wash dishes under maximum water pressure. At the same time, they are sincerely surprised when they find out that after 4 people spend up to 100 liters of water on washing dishes. Therefore, if you want to save water in an apartment with a meter, you need to immediately get rid of this habit. Close the sink with a stopper, fill warm water, wash the dishes and then just rinse them under running cold water with minimal pressure. You can wash vegetables and fruits in the same way.

7. Many people buy dishwashers to save time and get rid of routine work. And only then they learn about another of their pleasant features: much lower than "hand" washing. Modern dishwashers spend from 10 to 15 liters per cycle. For maximum savings, use it only when fully loaded to ensure optimal distribution of items.

Saving water in the bathroom

Some of the tips above apply to the bathroom as well. For example, using water-saving nozzles (including shower heads) or sink caps. The following little tricks will help to save water in an apartment with a meter as much as possible.

1. Carefully check the toilet for leaks. This can be done by adding a little colorant to the canister. If the water in the toilet changes color after a while, then the system is faulty and needs to be repaired or changed.

2. Old toilet bowls were designed without taking into account water saving, so every time they mercilessly pour 10-13 liters down the drain. Replace it with a more modern one, for which 5 liters is enough for a high-quality flush, and some even 3. The two-button flush is the greatest invention of humanity, allowing you to save a significant amount of water.

3. If it is not possible to replace the toilet, you can reduce the volume of flushed water by "folk" methods. Put one or more filled with water in the tank plastic bottles, securing them so that they do not dangle and do not interfere with the operation of the mechanism. By displacing 2-3 liters of water in this way, you will reduce the drain volume by the same amount. At the same time you can demonstrate to children practical use Archimedes' law.

4. The fact that a shower is three times more economical than a bath, we have already said in. This is true with a small amendment: the shower must be "fast". Think for yourself, a standard bath (along with you) will fit about 150 liters of water. And the shower consumes up to 15 liters per minute. It turns out that if you wash for more than 10 minutes, singing arias or playing with soap bubbles, then it will be more economical to do it in the bathtub than in the shower.

5. When taking a shower, try not only to reduce the time spent under it, but also turn off the water when it is not needed. Wet - turned off the tap, soaped, then opened. Do the same in the sink, while shaving or brushing your teeth.

6. If you need to rinse your hands, do not open the tap completely, but only partially. Try to use cold water more than hot water.

7. Do not confuse a trash can with a toilet, throwing everything into it and flushing it every time.

Everyone needs water, but not enough water for everyone. Life in big cities spoiled many with the availability of necessary goods and made them forget about reasonable economy. Utilities tariffs awaken from such carelessness and make you think twice before taking a bath every day, turn on the washing machine to wash one T-shirt or not turn on the taps.

There are many ways to save on water bills, some of them are illegal, and some of them allow you to use the resources of the planet wisely, which means you pay less. If you are starting construction work and want to add these tricks to it, use. With their help, the renovation will take place without holes in the budget, and the premises itself will not need to be redone in the future.

A careful attitude to the consumption of water must be brought up in yourself and your offspring. To do this, you should properly organize your life and lifestyle, turning an economical approach into a habit:

  1. Washing and washing of dishes must be carried out in fully loaded machines. You shouldn't turn on the machine for the sake of one thing. It is also advisable to abandon the additional rinse mode. Waste rinsing is intended for allergy sufferers and newborns. In other cases, select economy mode and phosphate-free detergents.
  2. Wash the dishes with your hands under a gentle pressure of water. Another way is to turn on the tap, lather all kitchen utensils, and then rinse. If it is difficult to control the water supply yourself, you can screw on the stopcocks on the pipes. Then the head will be less, and this will make it possible to save on water bills.
  3. Repair plumbing fixtures. It is necessary to exclude the possibility of leaking taps and passing water in the drain tank. You also always need to tighten the taps tightly.
  4. Brushing your teeth takes more than one minute, so you should turn off the water during this hygiene procedure, and you can use a glass to rinse your mouth. A similar principle should be followed when taking a shower.
  5. It is better for car owners to abandon the hose in favor of a bucket. This approach will help save water in half.
  6. Installing diffuser-aerators on taps will allow you to use less water when washing your hands. Now such nozzles are business as usual, but once upon a time they were.
  7. Place a couple of plastic bottles filled with water at the bottom of the toilet cistern. With their help, you can reduce the capacity of the tank and save on water consumption when flushing. Another option is to change the old one. cistern to the modern model, which has two buttons: for full and partial draining.
  8. Replace the mixer with twist-off taps with a lever mixer. It makes it easier to control the temperature of the water.
  9. Connect a foot pedal to the sink. The water supply is carried out only after pressing the pedal, and this can significantly reduce the consumption.
  10. If a lot of people live in the apartment and you have to wash dishes often, it is better to get a dishwasher. A good model helps you save more than 40 liters of water per day, and it also saves you a lot of time.
Daily use of these principles will reduce water consumption by 500 liters.

If your minimum income is less than the subsistence level, you can apply for a housing subsidy. Also, families who spend more than 22% of their income on utilities can count on help from the state. Muscovites have the right to count on a subsidy at 10% of the total income.

The active increase in tariffs for housing and communal services has generated a lot of talk. Specialists who know how to save on bills began to be invited to radio and television programs. Here's what they recommend:

  • Soak dishes before washing ... According to this principle, residents Western countries live for more than one decade. Soaking not only saves on water consumption, but also makes the washing process easier. Remnants of food, dried liquids adhering to the plates can be easily washed off if the dishes are soaked for several hours in a sink with detergent, previously closed with a stopper. Usually, two sinks are used for these purposes; in a single case, you can use a bucket or a deep bowl.
  • Before washing, kitchen utensils are wiped with a sponge with a fresh portion of detergent, and only then rinsed. To fiddle with soaking less, you should use less frying and baking. Boiled and steamed food is easier to clean from dishes and is good for your health.
  • Use used water ... If you still have water in the kettle or after boiling the eggs, don't rush to empty it. The secondary liquid can be used for good purposes: water houseplants, wipe the dust or the floor, use it to soak dishes, etc.
  • The easiest way to collect liquid is to place the container on the bottom of the sink every time you wash vegetables or fruits.
  • The use of secondary water is practiced all over the world. Australians use liquid collected in the bathtub and in the kitchen, using it to wash cars or to serve in a toilet bowl. In Germany, the remaining boiled water is poured into a thermos and used for cooking or washing dishes.
  • Shower wisely ... Once upon a time, only rich people could afford to soak up the bathroom. Now this pleasure cannot be called affordable either. An average bath has a few tens of liters, so if you want to save on water bills, take a shower. It is worth giving up the bath for another reason - it is not particularly hygienic.

It is easy to save on water procedures:

  • take a shower with your loved one more often; when soaping, turn off the water;
  • install the diffuser on the tap (it will save 40% of water);
  • do not turn on the tap under high pressure.

In order to take a shower comfortably, study in advance.

However, sometimes you can pamper yourself and soak in the bathroom without harming your budget. It will take a little patience and time: to get a bath, you need to turn on the tap on a small stream of water. The meter will not be able to calculate the water consumption, since the head will be minimal. By this principle, you can take a bath overnight, and then use the water for domestic purposes.

Choosing economical plumbing

For minimum water consumption, special taps are used. Often they can be found in cafeterias and fast foods with a large flow of people. Such plumbing is equipped with touch sensors: by capturing the warmth of the hands, it supplies water at the optimal temperature, and when there is no movement, the water is automatically turned off. This method helps to save water with the greatest comfort for consumers. It cannot be called cheap, but thanks to the savings on bills, it will pay off quickly.

Care should be taken to update the toilets. To flush out obsolete samples, a large number of water - about 25 liters. Whereas modern models consume no more than four liters. This is an expensive way to save money, but very effective.

Repair the water leak in a timely manner

A dripping faucet can hurt your budget a lot. Every day he “steals” about ten liters of water, a leak consumes more than three hundred liters per month, and deprives you of 27 baths during the year.

In order not to waste resources and money in vain, eliminate the leak in time. Finding them is not always easy, so you can invite a plumber to assess the condition of your plumbing fixtures.

You can independently check the cistern - pour food coloring into it and observe the toilet bowl. If after a short time it becomes pigmented, then it's time to fix the leak.

Installation of calculating devices is the most reasonable solution in a situation of constant increase in utility tariffs. With water meters, you will not overpay for extra cubic meters of water, which are charged in a certain amount for each resident of the apartment. You will only pay for the amount of fluid you have consumed.

Counters are individual and general. According to the principle of operation, they are classified into tacheometric, electromagnetic, vortex and ultrasonic. The first option is more often than others installed in apartments, since they operate without power supply. But they should be regularly cleaned of contaminated water and filters changed.

Counters practically do not take up space, but it is important that there is constant access to them. This should be taken into account,.

You can install devices yourself or invite a wizard. In the latter case, you will have to pay not only for the meters, but also for the installation. If you decide to install the device yourself, you need to make sure that the installation is correct, otherwise the representative of the water utility will not seal the meter.

To register a water meter, you will need a number of documents:

  • certificate of delivery and acceptance of the installed calculating device (it contains the meter number, date of installation, information about the consumer, representatives of the installation organization);
  • technical passport for the calculating device (the date of installation and commissioning, as well as the primary indicators of the device are indicated);
  • a document on the control of a water metering device (dates and information about meter checks are recorded, they are carried out every four years).

Water meters allow you to save water at times, and also bring up a thrifty attitude to the consumption of resources. You will have to pay only for the consumed water, because without calculating devices the amount of the bill is divided by the registered tenants. Often you have to pay for commercial organizations connected to the communications of a residential building, when tenants share their costs. The counter saves you from unnecessary waste and allows you to pay only after the fact.

mob_info